Motor Current - Danfoss VLT 6000 Quick Setup Manual

Changing data
Regardless of whether a parameter has been
selected under the Quick menu or the Extend
menu, the procedure for changing data is the
same.
Pressing the [CHANGE DATA] key gives access
to changing the selected parameter, following
which the underlining in line 4 will flash on the
display.
The procedure for changing data depends on
whether the selected parameter represents a
numerical data value or a functional value.
If the chosen parameter represents a numeric
data value, the first digit can be changed by
means of the [+/-] keys. If the second digit is to
be changed, first move the cursor by using the
[<>] keys, then change the data value using
the [+/-] keys.
FREQUENCY
Hz
24.2
205 MAX.
000050,000 Hz
The selected digit is indicated by a flashing
cursor. The bottom display line gives the data
value that will be entered (saved) when signing
off by pressing the [OK] button. Use [CANCEL]
to cancel the change.
If the selected parameter is a functional value,
the selected text value can be changed by
means of the [+/-] keys.

MOTOR CURRENT

3.90 A
210 REFERENCE
The functional value flashes until signing off by
pressing the [OK] button. The functional value
has now been selected. Use [CANCEL] to
cancel the change.
MG.60.C4.02 – VLT is a registered Danfoss trademark
®
VLT 6000 HVAC
Infinitely variable change of numeric data
value
If the chosen parameter represents a numeric
data value, a digit is first selected by means of the
[<>] keys.
FREQUENCY
50.0 HZ
209 JOG FREQUENCY
09.0 HZ
Then the chosen digit is changed infinitely variably
by means of the [+/-] keys:
FREQUENCY
SETUP
50.0 HZ
1
209 JOG FREQUENCY
10.0 HZ
The chosen digit is indicated by the digit flashing.
The bottom display line shows the data value that
will be entered (saved) when signing off with [OK].
SETUP
1
SETUP
1
SETUP
1
21