Table of Contents
Advertisement
The drain hose at the siphon
is blocked
Turn the programme selector to
1.
Û (Off). Pull out the mains plug.
Loosen the hose clamp. Carefully
2.
remove the drain hose; residual
water may leak out.
Clean the drain hose and siphon
3.
connecting piece.
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the Cottons v (activate
2.
( varioSpeed setting) programme.
If your appliance with
Note:
intelligent dosing system
need to deactivate the intelligent
dosing system.
Select the I Start/Reload button.
3.
Allow the programme to run for
approx. 40 seconds.
Turn the programme selector to
4.
Û (Off).
Pull out the mains plug.
5.
*
Depending on the module
Clean the filters:
1.
2.
3.
*
, you also
4.
Cleaning and maintenance
Disconnect the hose from the rear of
the appliance.
Use pliers to remove the filter.
Clean the filter with a small brush.
Connect the hose and check for
leaks.
en
43
Advertisement
Table of Contents
