Related Manuals for Siemens WN54C2A0NL
Summary of Contents for Siemens WN54C2A0NL
- Page 1 WN54C2A0NL Wash-/dry machine EN Usermanual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Refer to the Digital User Guide for more information. Table of contents 1 Safety........4 7 Display ........22 1.1 General instructions .... 4 8 Buttons ........26 1.2 Destination of the device ..........4 9 Programs ......29 1.3 Restriction of users ..4 10 Accessories........ - Page 3 15 Intelligent dosing system ..37 20.3 Putting the device back into 15.1 Start program with intelligent operation ........ 63 dosing system ..37 20.4 Disposal of your old 15.2 Filling the dosing reservoir ..38 device ..........64 15.3 Contents of the dosing 21 After-sales service......
-
Page 4: Safety
Safety 1 Safety Please observe the following safety precautions. 1.1 General instructions ¡Read these instructions for use carefully. ¡Keep the instructions for use and product information for later for use or for subsequent owners. ¡Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: ¡to wash machine-safe textiles and wool for hand washing... -
Page 5: Safe Installation
Safety 1.4 Safe installation WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device according to the information on the rating plate. ▶ Only connect the device to an alternating current mains via a properly installed earthed socket. - Page 6 Safety ▶ Use only adapters and power cords approved by the manufacturer. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical specialist to adjust the home installation. WARNING ‒ Risk of injury! The high weight of the device can cause injuries when lifting.
-
Page 7: Safer Use
Safety 1.5 Safer use WARNING ‒ Risk of electric shock! A damaged device or power cord is dangerous. ▶ Never use a damaged device. ▶ Never pull on the power cord to disconnect the device from the mains. Always pull the plug on the power cord. ▶... - Page 8 Safety WARNING ‒ Risk of explosion! Coal dust or flour in the vicinity of the appliance can lead to explosions. ▶ Keep the area around the device clean during use. WARNING ‒ Risk of poisoning! Washing and care products can lead to poisoning if ingested. ▶...
-
Page 9: Safe Cleaning And Maintenance
Safety ▶ If drying is stopped prematurely, immediately remove and spread out the laundry. CAUTION ‒ Risk of injury! The cover plate may break when climbing or clambering onto the device. ▶ Do not climb or clamber onto the device. The appliance may tip over when sitting or leaning on the open door. - Page 10 Safety ▶ If the power cord of this appliance becomes damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid hazards. Penetrating moisture can cause a shock. ▶ Do not use a steam cleaner, high-pressure cleaner, hoses or nozzles to clean the device.
-
Page 11: Avoiding Material Damage
Avoid material damage Install the valve housing of the ▶ Material damage avoid material damage water supply hose without contact avoid with the environment and do not expose it to external forces. Avoid material damage Make sure that the inside diameter ▶... -
Page 12: Environmental Protection And Saving
Environmental protection and saving Do not use cleaning agents ▶ Reduce washing temperature for containing strong alcohol. lightly and normally soiled laundry. ▶ Do not use hard scouring or aAt low temperatures it consumes dishwashing sponges. device uses less energy. For light Clean the device only with water ▶... -
Page 13: Energy Saving Mode
Set up and connect 3.3 Energy saving mode 4.2 Contents of the package If you do not operate the device for a After unpacking, check all parts for long time, it will automatically switch transport damage and the to energy saving mode. completeness of the delivery. -
Page 14: Protections
Set up and connect WARNING Staging location Requirements Risk of injury! The device al- Kitchenette When used on a pedestal, the device borrow under one may tip over. continuous work ▶ The device feet for commissioning place sheet, must be placed on a base absolutely that fixed with the with the mountings adjacent... -
Page 15: Connecting The Device
Set up and connect Loosen and remove all bolts of the Place the 4 cover caps. 4 transport locks with an open-end wrench with a spanner width of Slide the 4 cover caps downwards. Remove the mains connection cable from the holder. - Page 16 Set up and connect Connect the water supply hose to Plastic stand The water drainage the tap (26.4 mm = 3/4"). pipe with rubber feeding tube with a bend run muff fix and drill gene. → "Accessories", Page 33 Connect the device electrically Remark:Your home electrical installation for this appliance must comply with local legal and safety...
-
Page 17: Adjusting The Device
Set up and connect Tighten the lock nuts hand-tight 4.6 Adjusting the device against the housing with a wrench To reduce noise and vibration and to with a spanner width of 17. avoid walking of the device, place the device horizontally. Turn the lock nuts clockwise with a wrench with a spanner width of Hold the device foot and do not... -
Page 18: Getting To Know Your Device
Get to know your device Get to know your device w g et to know device to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the image may differ, e.g. the color and other details. -
Page 19: Control Panel
Get to know your device maintenance products and the Manual dosing compartment information in the program descriptions. / : dispenser for fabric softener or liquid detergent : liquid detergent dispenser 1 2 3 5.3 Control panel You can use the control panel to set all functions of your device and obtain information about its operating status. - Page 20 Get to know your device to push; The activated settings are To display the additional keys, press highlighted in color on the display. brieflyMore optionsto press. Forceful impact on the display can aThe display shows all additional keys. cause damage. ▶...
-
Page 21: Before First Use
Before first use Press the selection buttons Pour leaded powder detergent into ▶ → Page 26 or swipe with a the manual dosing compartment. finger with a certain pressure over the scale. To avoid foaming, use only half the amount recommended by the The display shows the setting value. -
Page 22: Display
Display Display isplay isplay On the display you will see the current setting values, selection options or instructions. singing lyrics. Example display indication Description Indication 0:40 Expected program duration or remaining time of the program in hours and minutes. Program end time →... - Page 23 Display Description Indication ¡lights up: the child lock is activated. ¡flashes: the child lock is activated and the device was served. → "Deactivate child lock", page 37 The anti-crease function is activated. → "Buttons", page 27 Washing followed by drying is activated. →...
- Page 24 Display Description Indication Settings that are not available on the device are set via the Home Connect app. More information can be found in the Home Connect app. ¡lights up: the intelligent liquid dosing system detergent is activated. ¡flashes: the minimum fill level of the dosing container is undershot.
- Page 25 Display Description Indication ¡lights up: the door is locked. – The door can be unlocked to add laundry. → "Adding laundry", page 36 – To open the door, you can cancel the program. → "Cancel washing programme", page 36 ¡flashing: the door is not closed. ¡No water pressure.
-
Page 26: Buttons
Buttons Buttons studs The selection of the program settings depends on the setting studs program. Knob Description Choice ¡Switch Switch on the device or put it in (mains switch standby mode. ¡Standby mode laar) Multiple selection To change a setting, press the selector button or until the display shows the desired setting. - Page 27 Buttons Knob Description Choice Prewash ¡activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡deactivate Remark:When the intelligent dosing system is activated, the detergent is automatically dosed for the prewash and the main wash. When the intelligent dosing system is deactivated, add the detergent for the prewash directly into the drum.
- Page 28 Buttons Knob Description Choice Stains Multiple selection Choose the type of stain. The temperature, drum movement and soaking time are adjusted to the type of stain. ¡activate When you briefly press the button, you i-Dos activate or deactivate the intelligent ¡deactivate dosing system for liquid detergent.
-
Page 29: Programs
Programs 9 Programs programs Programs Remark:The care labels of the laundry give you additional instructions for program selection. Max. max. Program Description bela- bela- thing thing (kg) (kg) Dro- Used to be- gene 10.0 Cotton Wash sturdy textiles made of cotton, linen and mixed fibres. - Page 30 Programs Max. max. Program Description bela- bela- thing thing (kg) (kg) Dro- Used to be- gene – Delicates Wash delicate, washable textiles made of silk, Silk viscose and synthetic fabrics. Use a detergent for delicates or silk. Remark:Wash particularly sensitive textiles or textiles with hooks, eyes or brackets in a laundry net.
- Page 31 Programs Max. max. Program Description bela- bela- thing thing (kg) (kg) Dro- Used to be- gene – Auto 30°C Wash sensitive textiles made of cotton, synthetic materials and mixed fabrics. Gentle washing treatment. The degree of contamination and type of textile are automatically recognized.
- Page 32 Programs Max. max. Program Description bela- bela- thing thing (kg) (kg) Dro- Used to be- gene ¡max. 1400 rpm Wash textiles made of cotton, linen, synthetic materials and mixed fibres. Suitable for lightly soiled laundry. Tip:Energy and time optimized program through hybrid technology.
-
Page 33: Accessories
accessories 0 Accessories accessories e use only original accessories. These are tailored to the device. accessories Usage Order number Extend cold water or Aquastop WZ10131 Extension water supply water supply hose (2.50 m). feeding tube Mounting brackets Improve the stability of the device. WX975600 Bend Fix the water drain hose. -
Page 34: The Ministry In Essence
The Ministry in essence ¡Use dyes in moderation, Press the desired program. Salt can damage stainless steel → "Programs", Page 29 ¡no bleaching agent in the appliance use ready ¡No vinegar in the dosing reservoir fill → Page 38 for the intelligent dosing system 3 The Operation in es- e Operation... -
Page 35: Save Program Settings
The Ministry in essence Open the door. 13.4 Save program settings You can save your individual program settings as a favorite. Requirements ¡A program has been set. → "Set program", page 34 ¡The program settings are amended. → "Adjust program settings", page 13.6 Fill the drum with laundry On for approx. -
Page 36: Starting The Program
The Ministry in essence such as stain remover, starch or Remark:If you want to add laundry, bleach. Do not add additional follow the instructions on the detergent to the manual dosing display. → "Display", page 25 compartment to avoid overdosing or foaming. -
Page 37: (Standby Mode)
Child lock Approx. 3s upChild safety lock 3 13.13 Device in sleep mode ▶ sec.to press. (standby mode) agoes out in the display to make Press . ntintelligent dosing system 5 Intelligent dosing system Wipe the rubber sleeve dry and remove foreign objects. -
Page 38: Filling The Dosing Reservoir
Intelligent dosing system ¡Activate the intelligent dosing system 15.2 Filling the dosing reservoir tem after the end of the program. → "Buttons", page 28 If you want to use the intelligent → "Buttons", page 28 dosing system or if the device displays a prompt during use, fill the Requirements dosing reservoirs. -
Page 39: Contents Of The Dosing Reservoir
Home Connect Add liquid detergent and fabric Adjust the contents of the dosing softener to the appropriate dosing reservoir containers. → Press for approx. 3 si-Dos "Detergent drawer", page 18 Pressi-Dos to set- len. aThe display shows displayed ven. Press againi-Dos to set. to get in To end the setting, wait briefly. -
Page 40: Set Up The Home Connect App
Home Connect nect app, adjust basic settings or 16.1 Set up the Home monitor the current operating Connect app status. The Home Connect services are not Install the Home Connect app on available in every country. The the mobile device. availability of the Home Connect function depends on the availability of Home Connect services in your... -
Page 41: Activate Wi-Fi On The Device
Home Connect Home Connect Navigate menu 16.6 Reset network settings of the device ShortlyControl via appPress until ▶ the display shows the desired setting. Requirements ¡The Home Connect menu has been Home Connect Exit menu call. → "Home Connect Call up On for at least 3 secondsControl ▶... -
Page 42: Protection Of Personal Data
Home Connect 16.8 Protection of personal data Please observe the instructions regarding the protection of personal data. When your appliance is connected to a home network connected to the Internet for the first time, it transmits the following categories of data to the Home Connect server (first registration): ¡Unique identification of the device... -
Page 43: Basic Settings
Basic settings 7 Basic settings basic settings Y OU you can set the basic settings of your device according to your wishes. basic settings 17.1 Overview of the basic settings Stand Description Choice Basic settings ling Signal 0 (off) Adjust the volume of the signal 1 (soft) after the end of the program. -
Page 44: Changing Basic Settings
Cleaning and maintenance 17.2 Change basic settings The program Cottons90°C ▶ without laundry and with a cleaning agent to maintain the interior of the appliance To call up the basic settings, press for approx. 3 secondsMore options → "Accessories", page 33 or with a to press. - Page 45 Cleaning and maintenance Empty the detergent drawer. Press the insert down and remove the detergent drawer. Clean the pump unit with a Remove the pump unit. damp cloth. Unlock and remove the detergent Clean the detergent drawer and lid drawer lid. with a soft, damp cloth or hand shower.
-
Page 46: Cleaning The Drain Pump
Cleaning and maintenance 18.3 Cleaning the drain pump Clean the drain pump regularly, at least once a year and in the event of malfunctions, e.g. blockages or chattering. Empty the drain pump Close the tap. Put the device in standby mode. →... - Page 47 Cleaning and maintenance Clamp the drain hose in the holder. Remove the drain hose from the holder. CAUTION - Risk of burns!The soap becomes hot when washing at Clean the drain pump high temperatures. Required:The drain pump is empty. → Page 46 ▶...
-
Page 48: Cleaning The Inlet Opening In The Rubber Sleeve
Cleaning and maintenance Make sure that both wing wheels Install and close the service flap. can be turned. 18.4 Clean the inlet opening in Install the pump cover. the rubber sleeve Regularly check the inlet opening in the rubber sleeve for blockages and clean the inlet opening. -
Page 49: Troubleshooting
Troubleshooting 9 Troubleshooting resolve disruptions You can resolve minor faults with the device yourself. Please consult before you resolve disruptions contact customer service for information on troubleshooting. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. - Page 50 Troubleshooting Cause and troubleshooting Malfunction "E:30 / -80" Drain pipe or water drain hose is kinked or trapped. Make sure that the drain pipe and water drain ▶ hose are not kinked or trapped. Water drain hose is connected too high. Mount the water drain hose at a maximum height of 1 ▶...
- Page 51 Troubleshooting Cause and troubleshooting Malfunction Make sure the water supply hose is not kinked or "E:30 / -10" and/or ▶ pinched. "E:35 / -10" Water in the bottom container. Close the tap. ▶ Please contact customer service. ▶ → "Service", Page 64 Device is leaking.
- Page 52 Troubleshooting Cause and troubleshooting Malfunction Detergent dosage is too high. Immediate measure: mix a tablespoon of fabric ▶ softener with 0.5 l of water and pour this mixture into the manual dosing compartment (not for outdoor, sportswear and down textiles). When intelligent dosing is activated, reduce the basic ▶...
- Page 53 Troubleshooting Cause and troubleshooting Malfunction Wrinkling. Spread the items out to let them cool. Unsuitable program set for the textile type. Set the appropriate program for the textile type. ▶ Easy care textiles dried too long. The mains plug of the power cable is not plugged in. Device does not work.
- Page 54 Troubleshooting Cause and troubleshooting Malfunction Program does not start. ▶ Slide in the detergent drawer until the symbol goes out. Door cannot be Temperature is too high. opened. ▶ Wait until the temperature has dropped. Cancel program. ▶ → "Cancel washing programme", page 36 Water level is too high.
- Page 55 Troubleshooting Cause and troubleshooting Malfunction Make sure that the pump cover is screwed into the Washing water is not ▶ pumped out. device as far as it will go. The handle of the pump cover must be vertical. → "Clean the drain pump", page 47 No water flows into was not pressed.
- Page 56 Troubleshooting Cause and troubleshooting Malfunction Strong foaming Detergent dosage is too high. ming. Immediate measure: mix a tablespoon of fabric ▶ softener with 0.5 l of water and pour this mixture into the manual dosing compartment (not for outdoor, sportswear and down textiles). When intelligent dosing is activated, reduce the basic ▶...
- Page 57 Troubleshooting Cause and troubleshooting Malfunction Spin program Remark:If possible, place large and small items of laundry together in the drum. Laundry of different running doesn't start. sizes distributes better during spinning. Start the program ▶ Spider. The water supply hose is not correctly/tightly At the water supply connected.
- Page 58 Troubleshooting Cause and troubleshooting Malfunction Centrifuge result is Low spin speed is set. not satisfied- Set a higher spin speed for the next wash. ▶ heid. The laundry is too wet / too damp. Start the program Spider. ▶ Anti wrinkleis activated. Choose a suitable program for the type of textile.
- Page 59 Troubleshooting Cause and troubleshooting Malfunction Clean the dosing reservoirs. Detergent residue left the damp laundry. Refill the dosing reservoirs. → "Filling the dosing reservoir", page 38 Basic dosing amount not set correctly. When intelligent dosing is activated, reduce the basic ▶...
- Page 60 Troubleshooting Cause and troubleshooting Malfunction Drying program Select a suitable drying program. ▶ → "Programs", Page 29 do not start. The program sequence is optimized electronically. This The program duration may lead to changes in the program duration. changes during the wash cycle.
- Page 61 Troubleshooting Cause and troubleshooting Malfunction Laundry is too damp. Insufficient air circulation at the installation location of the device. ▶ Ventilate the installation location of the device. Water pressure is low. No solution possible. Laundry not spun insufficiently. Always select the maximum possible spin speed for ▶...
- Page 62 Troubleshooting Cause and troubleshooting Malfunction Drying phase needs water. Water inlet noise during No malfunction. during the drying phase. Make sure that the water tap remains open during the drying phase. Odor has developed in Humidity and detergent residue can stimulate the device bacterial growth.
-
Page 63: Emergency Release
Transport, store and dispose of Allow the soap to drain. 19.1 Emergency release → "Clean the drain pump", Unlock door page 46 Dismantle the hoses. Required:The drain pump is empty. → Page 46 Empty the dosing containers. NB!Running water can lead to 20.2 Installing transport protection property damage. -
Page 64: Disposal Of Your Old Device
Service department 20.4 Disposal of your old sche equipment (waste electrical and electronic device equipment - WEEE). Valuable raw materials can be reused The directive sets the through environmentally friendly framework for take-back disposal. valid in the EU and processing of old equipment. -
Page 65: Product Number (E-No.), Production Number (Fd) And Serial Number (Z-No.)
Service department king for defective supply lines or 21.1 Product number (E-No.), fittings up to the AquaStop production number (FD) connection on the tap. and serial number (Z-No.) ¡While using a device In principle, with AquaStop you do The product number (E-No.), the not have to stay or stop. -
Page 66: Consumption Values
Consumption values usability values 2 Consumption values usability values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for programs other thanEco 40-60are only guideline values and were determined in accordance with the applicable standards EN60456 and EN62512. -
Page 67: Technical Data
Technical data Pro- Maxi Program Bela- Ener- Water- Centri- Rest- far- male gram- giever- fugue thing moisture- (kg) rev- maduur tempe- semi- usage (l/ (h:min) (kWh/ cycle) rature at (%) number (t/ cycle) (°C) 5 min) 1:10 50.0 1400 Mix 40 °C 0.750 45.00 0:41... -
Page 68: Declaration Of Conformity
The model conformity can be found on the Internet identification consists of the slash at siemens-home.bsh-group.com on the character of the E number (E-Nr.) on the product page of your device in the type plate. Alternatively, you will also find additional documents. - Page 72 NL Geproduceerd door BSH Hausgeräte GmbH onder de handelsmerklicentie van Siemens AG BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com *9001771534* 9001771534 (030717)
Need help?
Do you have a question about the WN54C2A0NL and is the answer not in the manual?
Questions and answers