Related Manuals for Siemens WN54G2AEDN
Summary of Contents for Siemens WN54G2AEDN
- Page 1 WN54G2AEDN Washer dryer EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 24 1.1 General information.... 4 9 Dryness level...... 26 1.2 Intended use...... 4 9.1 Changing the dryness level.. 26 1.3 Restriction on user group.. 4 1.4 Safe installation ...... 5 10 Programmes ...... 27 1.5 Safe use ........ - Page 3 14.14 Unloading the laundry .. 35 14.15 Switching off the appli- ance........ 35 15 Childproof lock...... 35 15.1 Activating the childproof lock ........ 35 15.2 Deactivating the childproof lock ........ 35 16 Intelligent dosing system .. 35 16.1 Starting the programme with intelligent dosing sys- tem.........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶... -
Page 6: Safe Use
en Safety If the power cord is too short and a longer one is not available, ▶ please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. - Page 7 Safety en If the appliance or the power cord is damaged, immediately un- ▶ plug the power cord or switch off the fuse in the fuse box and turn off the water tap. Call customer services. → Page 58 ▶ An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces.
- Page 8 en Safety WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. Remove all highly flammable objects from any pockets in your ▶ laundry before the drying process. Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress.
-
Page 9: Safe Cleaning And Maintenance
Safety en CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot. Do not touch the hot detergent solution. ▶ CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. - Page 10 en Safety WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents. Do not use cleaning agents that contain solvents. ▶...
-
Page 11: Preventing Material Damage
Preventing material damage en Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Preventing material damage ATTENTION! able to operate properly. -
Page 12: Environmental Protection And Saving Energy
en Environmental protection and saving energy Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the appli- mediately if they come into contact ance afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 13: Installation And Connection
Installation and connection en Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 31 Installation and connection Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. - Page 14 en Installation and connection ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. power cord or Do not install or operate this appli- ▶ the hoses ance anywhere that is liable to ex- between the wall...
-
Page 15: Connecting The Appliance
Installation and connection en Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves. - Page 16 en Installation and connection Connect the water inlet hose to a Siphon Secure the con- tap (26.4 mm = 3/4"). nection point with a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- bow. → "Accessories", Page 31 When connecting to a 21 mm = ½" Plastic pipe with Fix and secure tap, first fit the adapter with a seal-...
-
Page 17: Aligning The Appliance
Installation and connection en Use a WAF 17 wrench to tighten 4.6 Aligning the appliance the lock nuts against the housing In order to reduce noise and vibra- until they are hand-tight. tion and to prevent the appliance from moving, align the appliance cor- rectly. -
Page 18: Detergent Drawer
en Familiarising yourself with your appliance Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 19: Control Panel
Familiarising yourself with your appliance en Manual dosing compartment : Dispenser for fabric softener : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 27 Programme selector → Page 32... -
Page 20: Before Using For The First Time
en Before using for the first time Start the first wash cycle or set the Before using for the first time 6 Before using for the programme selector to to switch off the appliance. first time → "Basic operation", Page 32 Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle... -
Page 21: Display
Display en Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 24 Recommendation for the maximum load capacity for the selected program in kg. - Page 22 en Display Display Description Spin Programme status Program end Programme status Drying Programme status Crease-reduction function Programme status Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 35 The crease-reduction function is activated.
- Page 23 Display en Display Description Lights up: The intelligent dosing system for fabric ¡ softener is activated. Flashes: The fill level of the dispenser is below the min- ¡ imum level. → "Intelligent dosing system", Page 35 (fabric softener) 50 ml Basic dosage for detergent or fabric softener. → "Basic dosage", Page 37 Lights up: The door is locked and cannot be opened.
-
Page 24: Buttons
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection Description - 90 Adjust the temperature. ℃ Set temperature in °C. - 1400 Adjust the spin speed or deactivate the spin cycle. Set spin speed in rpm. - Page 25 Buttons en Button Selection Description and Activate → "Childproof lock", Page 35 ¡ Deactivate ¡ Activate Briefly press the button to activate or ¡ deactivate the intelligent dosing sys- Deactivate ¡ tem for fabric softener or liquid de- Basic dosage ¡...
-
Page 26: Dryness Level
en Dryness level Dryness level 9 Dryness level In some programmes, a dryness level is predefined. The dryness level defines Dryness level how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. that does not dry readily. - Page 27 Programmes en Programmes 10 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Wash Dry- Bomuld(Cot- Wash hard-wearing items made of cotton, 10.0 ton) linen or blended fabrics. Also suitable as a short programme for nor- mally soiled laundry when you activate Programme setting:...
- Page 28 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Wash items made from cotton, linen, or syn- thetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: Max. 60 °C ¡ Max. 1400 rpm ¡ Finvask/ Wash delicate, washable items made from –...
- Page 29 Programmes en Programme Description Max. Max. load load (kg) (kg) Wash Dry- Use a waterproofing agent that is suitable for machine-washing. Do not use fabric softener. Place the detergent for outdoor fabrics in the manual dosing compartment. If the pro- gramme stops before the last rinse cycle, add the waterproofing agent to the manual dosing compartment.
- Page 30 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Notes The laundry is not dried or washed. ¡ If you use the smartFinish programme of- ¡ ten without washing in between, this may cause odours in the appliance. Super Wash and dry items made from cotton, linen, 15' / Wash &...
-
Page 31: Preparing The Laundry
Accessories en Accessories 11 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 58. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WZ10131 tension or AquaStop (approx. -
Page 32: Detergents And Care
en Detergents and care products 14.2 Setting a programme Detergents and care products 13 Detergents and care products Turn the programme selector and set the required programme. The manufacturer's instructions for Detergents and care products → "Programmes", Page 27 use and dosage can be found on the If required, adjust the programme packaging. -
Page 33: Inserting The Measuring Aid For Liquid Detergent
Basic operation en Fold the measuring aid down and 14.5 Inserting the measuring click it into place. aid for liquid detergent If you order the measuring aid as an accessory, you must use the measur- ing aid. Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. -
Page 34: Soaking Laundry
en Basic operation The display shows the programme During the drying cycle, the appli- duration or the programme end ance checks whether it is possible time. to add laundry. After the programme has ended, Note: If you want to add laundry, the display shows: End. follow the instructions on the dis- If the display shows , the laundry... -
Page 35: Resuming The Programme When The Programme Status Is Rinse Hold
Childproof lock en 14.13 Resuming the pro- Childproof lock 15 Childproof lock gramme when the pro- Secure your appliance against being gramme status is Rinse Childproof lock operated unintentionally using the Hold controls. Requirements 15.1 Activating the childproof Rinse Stop is activated. ¡ The last rinse cycle of the set pro- ¡... -
Page 36: Filling The Dispensers
en Intelligent dosing system This function is available depending To replace the contents of the dis- on the selected programme and is penser with another product, clean activated automatically. the detergent drawer. → "Cleaning the detergent drawer", Note Page 40 If you are using the intelligent dosing If required, adjust the contents of system, do not add additional deter- the dispenser. -
Page 37: Basic Dosage
Intelligent dosing system en Open the dispenser cover. 16.3 Basic dosage The basic dosage depends on the manufacturer's instructions for the de- tergent, the water hardness and the degree of soiling of the laundry. Always set a basic dosage that cor- responds to the dosage for a stand- ard load of 4.5 kg. -
Page 38: Overview Of The Basic Settings
en Basic settings Basic settings 17 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 17.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 39: Changing The Basic Set- Tings
Cleaning and servicing en 17.2 Changing the basic set- Cleaning and servicing 18 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully. -
Page 40: Cleaning The Detergent Drawer
en Cleaning and servicing Remove the pump unit. 18.2 Cleaning the detergent drawer If you want to replace the liquid de- tergent or fabric softener in the dis- penser with another product or if the detergent drawer is dirty, clean the detergent dispenser. ATTENTION! The pump unit contains electrical components. -
Page 41: Cleaning The Drain Pump
Cleaning and servicing en Clean the pump unit with a damp cloth. Clean the housing of the detergent drawer in the appliance. Clean the detergent drawer and the cover with a soft, damp cloth or hand shower. Push in the detergent drawer. 18.3 Cleaning the drain pump Dry the detergent drawer, cover Clean the drain pump regularly, at... - Page 42 en Cleaning and servicing Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 43 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Requirement: The drain pump is empty. → Page 41 Since water may remain in the drain pump, unscrew the pump cap carefully. Screw the pump cap as far as it will go. Clean the interior, the thread on the pump cap and the pump hous- ing.
-
Page 44: Cleaning The Intake Opening In The Rubber Gasket
en Cleaning and servicing 18.4 Cleaning the intake opening in the rubber gasket Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. Open the appliance door. Remove any blockages from the intake opening. Note: Do not use any sharp or poin- ted objects. -
Page 45: Troubleshooting
Troubleshooting en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 46 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Install the water outlet hose at a maximum height of ▶ 1 metre. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 15 Detergent dosage is too high.
- Page 47 Troubleshooting en Fault Cause and troubleshooting "E:30 / -10" and/or If the error message is displayed again, call cus- tomer service. → "Customer Service", Page 58 The detergent drawer has not been pushed in fully. Push in the detergent drawer until the symbol goes ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
- Page 49 Troubleshooting en Fault Cause and troubleshooting The programme does Childproof lock is activated. not start. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 35 is activated. Check whether is activated. ▶ → "Buttons", Page 24 Laundry is caught in the door. Remove any trapped laundry. ▶...
- Page 50 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Install the water outlet hose at a maximum height of ▶ ing. 1 metre. Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 51 Troubleshooting en Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Vibrations and move- Appliance is not correctly aligned.
- Page 52 en Troubleshooting Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrifugering(Spin) programme. ▶ The spin programme Drain pipe or water outlet hose is blocked. does not start.
- Page 53 Troubleshooting en Fault Cause and troubleshooting Insufficient cleaning. Check whether the detergent used is suitable. → "Detergents and care products", Page 32 Drain the dispenser. → "Cleaning the detergent drawer", Page 40 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 36 The spin result is not A low spin speed is selected.
- Page 54 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Check whether the detergent used is suitable. the damp washing. → "Detergents and care products", Page 32 Drain the dispenser. → "Cleaning the detergent drawer", Page 40 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 36 Basic dosage is not correctly adjusted.
- Page 55 Troubleshooting en Fault Cause and troubleshooting The programme dura- Foam detection system switches on a rinse cycle if tion changes during foam build-up is too high. the wash cycle. Not a fault – no action required. ▶ Drum jerks after the This is caused by an internal motor test.
- Page 56 en Troubleshooting Fault Cause and troubleshooting Loud noises during Appliance is not correctly aligned. the spin cycle. → "Aligning the appliance", Page 17 ▶ The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 17 Transit bolts have not been removed. → "Removing the transit bolts", Page 14.
-
Page 57: Emergency Release
Transportation, storage and disposal en 19.1 Emergency release 20.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 41 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 58: Disposing Of Old Appliance
en Customer Service 20.4 Disposing of old appli- Customer Service 21 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 59: Consumption Values
Consumption values en Consumption values 22 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values specified for programmes other than Eco 40-60 are only given as a guide and were determined in accordance with the applicable stand- ards EN60456 and EN62512. -
Page 60: Technical Data
en Technical data You can find more information about Technical data 23 Technical data your model online at https:// eprel.ec.europa.eu/ . This web ad- Technical data dress is linked to the official EU Appliance height 84.8 cm EPREL product database. Please Appliance width 59.8 cm then follow the instructions on Appliance depth... - Page 64 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the WN54G2AEDN and is the answer not in the manual?
Questions and answers