Additional Programme; Settings; Ô Wash + Dry; Ã Select - Siemens WN54A2U0IN Instruction Manual And Installation Instructions

Additional programme settings
en
\

Additional programme

settings

You can find possible additional
N ote:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
Ô Wash + Dry
Touch Ô Wash + Dry to activate or
deactivate the drying function. The
washing and drying without interruption
mode, individual drying mode and
individual washing mode can be
selected with this function.
Washing and drying without
■
interruption mode(only for Optional
drying programmes): select a
washing programme and touch
Ô Wash + Dry (The symbol Ô ˜ x
appeared in display). Then touch
I Start/Reload , the programme
runs and the drying time is
automatically set according to
selected programme and the
amount of laundry.
The individual drying mode: select a
■
washing programme and touch
Ô Wash + Dry till only the symbol Ô
appeared in display. The laundry will
be drying without washing.
34
The individual washing mode: when
■
select a programme (e.g.% Wash &
Dry 60 min) that defaulted washing
and drying phases combined, touch
Ô Wash + Dry till only the symbol x
appeared in display. The drying
phase will be cancelled.
Notes
Do not exceed the maximum loads
■
for drying.
Overview of programmes
~ Page 29
Maximum spin speed for
■
programme with drying phase will be
selected automatically to obtain a
good drying result.
ã Select
Types of stain that can be selected:
Oil
Ì
Red Wine
â
Cosmetic
î
Orange
ó
Do not let stains dry. Remove solid
substances beforehand.
Select a programme with a stain type:
Arrange items of washing as usual.
1.
Select a programme.
2.
Select a stain type (depending on
3.
the selected programme).
Start the programme.
4.
The appliance adjusts the average
washing temperature, drum movement
and soaking time to the specific type of
stain. Hot or cold water, gentle or
intensive washing and long or short
soaking ensure that the wash
programme sequence is specially
adapted to each type of stain. This
makes sure that stains are treated in the
best possible way.