Service / Parts Information; Service; Parts - American Dryer Corp. AD-210 Installation Manual

Phase 7 / non-coin / 650,000 btu/hr with non-tilting options
Table of Contents

Advertisement

A. SERVICE
1. Service must be performed by a qualified trained technician, service agency, or gas supplier. If service is
required, contact the reseller from whom the ADC equipment was purchased. If the reseller cannot be contacted
or is unknown, contact the ADC Service Department for a reseller in your area.
NOTE: When contacting the ADC Service Department, be sure to give them the correct model number
and serial number so that your inquiry is handled in an expeditious manner.
B. PARTS
1. Replacement parts should be purchased from the reseller from whom the ADC equipment was purchased. If
the reseller cannot be contacted or is unknown, contact the ADC Parts Department for a reseller in your area.
Parts may also be purchased directly from the factory by calling the ADC Parts Department at +1 (269) 923-3000
or you may FAX in your order at +1 (508) 678-9447.
NOTE: When ordering replacement parts from the ADC reseller or the ADC factory be sure to give them
the correct model number and serial number so that your parts order can be processed in an
expeditious manner.
42
SECTION IV

SERVICE / PARTS INFORMATION

American Dryer Corporation
113549 - 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml-210

Table of Contents