5-10 Onboard Indicators - Supero SUPERSERVER 6028TP-HC1R User Manual

5-10 Onboard Indicators

LAN Port LEDs
The LAN ports are located on the rear I/O
panel. On each Gb LAN port, one LED
blinks to indicate activity while the other
may be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associated
with the connection speed LED.
IPMI Dedicated LAN Port LEDs
In addition to the Gigabit Ethernet ports,
an IPMI Dedicated LAN is also located
above USB ports 0/1. The amber LED
on the right indicates activity, while the
link LED on the left indicates the speed
of the connection. See the table at right
for more information.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
BMC_HB_LED1 on the serverboard.
W hen this LED is blinking, B M C
functions normally. See the table at
right for more information.
Rear UID LED
The rear UID LED is located on the rear
of the serverboard. This LED is used in
conjunction with the rear UID switch to
provide easy identification of a system
that might be in need of service.
Chapter 5: Advanced Serverboard Setup
LAN Port LED
(Connection Speed Indicator)
LED Color Definition
Off 10 Mbps
Green 100 Mbps
Amber 1 Gbps
LAN 1/LAN 2
Link LED
IPMI LAN
(X8ST3-F)
IPMI LAN Link LED (Left) &
Activity LED (Right)
Link (Left)
Activity
(Right)
BMC Heartbeat LED
Color/State
Green:
Blinking
Color/State OS Status
Blue: On Windows OS
Blue: Linux OS
Blinking
5-19
IPMI LAN
Activity LED
Color/State Definition
Green 100 Mbps
Amber 1 Gbps
Amber: Blink- Active
ing
Status
Definition
BMC: Normal
UID LED
Status
Unit Identified
Unit Identified