Installing The Air Shroud - Supermicro SUPERSERVER 2028GR-TRT User Manual

SUPERSERVER 2028GR-TR/TRT/TRH/TRHT Series User's Manual

Installing the Air Shroud

Air shrouds concentrate airflow to maximize fan efficiency. The serverboard air
shroud does not require screws for installation. Each GPU card has its own air
shroud.
Installing the Serverboard Air Shroud
1. Lay the chassis on a flat, stable surface and remove the chassis cover.
2. Ensure that the motherboard, CPU, heatsink and memory are all properly
installed.
3. If necessary, move any cables that interfere with the air shroud placement.
4. Place the air shroud in the chassis. The air shroud fits just behind the fans
in the fan rack. Slide the air shroud into the grooves just behind the fan rack.
Note that some serverboards may require the air shroud to be modified to fit
over the serverboard.
Figure 6-17. Installing the Air Shroud
6-14