Table of Contents
Advertisement
[4]
Select a cut method from the [Method of Cut] menu.
There are following modes in the [Method of Cut] menu.
Single Cut - 2 steps
Single Cut - 3 steps
Double Cut - 2 steps
Double Cut - 3 steps
[5]
Select [High] or [Low] for cut strength in the [Cut Pressure] menu.
• [Low] is used for thin media.
[6]
Click [Update].
• The setting is reflected on the product.
Cut with fewer steps than "Single Cut - 3 steps".
Suitable for media with narrow width.
By default, this cut method is used.
Set when unable to cut with "Single Cut - 2 steps".
Suitable for media with narrow width.
Set when unable to cut with "Single Cut - 3 steps".
Setting auto cut
39
Advertisement
Table of Contents
