Multiple Handset Use; Join A Call In Progress; Handset Locator - AT&T TL88102BK User Manual

Multiple Handset use

Multiple handset use

Join a call in progress

You can use up to four system handsets, or three system handsets and
the telephone base at the same time on an outside call. If a handset or the
telephone base is already on a call on line 1 or line 2 and you would like to
join the call, press the corresponding line button on another handset
(LINE 1/ or LINE 2/
FLASH
to join the call.
To end the call, press
telephone base or charger, or press
base. The call will not be terminated until all handsets and/or the telephone
base hang up.

Handset locator

This feature helps you find a misplaced handset.
To start paging:
1. Press the MENU soft key when the telephone base is not in use.
2. Press or p
q
CID
press the SELECT soft key on the telephone base. The
telephone base shows Paging all handsets and the
handset shows **Paging**.
To end paging:
Press the STOP soft key on the telephone base.
•
-OR-
• Press OFF/CANCEL, LINE 1/FLASH, LINE 2/FLASH,
, REDIAL/PAUSE, HOLD or any dialing keys (0-9, #, ) on the handset.
p
DIR
) or telephone base ( /LINE 1 or
FLASH
OFF/
CANCEL
to scroll to Page all HS, then
DIR
on the handset, place the handset in the
/LINE 1 or /LINE 2 on the telephone
31
/LINE 2)
Call log
Page all HS
Intercom
SPEAKER, INT,
/ q
SELECT
,
CID