Table of Contents
Advertisement
Safety Earth Ground
This is a Safety Class I product (provided with a protective earthing
terminal). An uninterruptible safety earth ground must be provided
from the main power source to the product input wiring terminals,
power cord, or supplied power cord set. Whenever it is likely that the
protection has been impaired, the product must be made inoperative
and secured against any unintended operation.
Before Applying Power
Verify that the product is configured to match the available main power
source as described in the input power configuration instructions in this
manual. If this product is to be powered by autotransformer, make sure
the common terminal is connected to the neutral (grounded) side of the
ac power supply.
Battery Information
The 8510C uses a lithium polycarbon monoflouride battery to power the
instrument clock. The battery is located on the A7 I/O board of the
85101C display/processor. This battery is not field replaceable. Replace
the A7 I/O board if the battery requires replacement.
Danger of explosion if battery is incorrectly replaced. Replace
WARNING
only with the same or equivalent type recommended. Discard
used batteries according to manufacturer's instructions.
vi
Advertisement
Table of Contents
