Table of Contents
Advertisement
Safety and Regulatory Information
Review this product and related documentation to familiarize yourself
with safety markings and instructions before you operate the
instrument. This product has been designed and tested in accordance
with international standards.
The WARNING notice denotes a hazard. It calls attention to a
WARNING
procedure, practice, or the like, that, if not correctly performed
or adhered to, could result in personal injury. Do not proceed
beyond a WARNING notice until the indicated conditions are
fully understood and met.
The CAUTION notice denotes a hazard. It calls attention to an
CAUTION
operating procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION notice until the
indicated conditions are fully understood and met.
Instrument Markings
When you see this symbol on your instrument, you should refer to the
instrument's instruction manual for important information.
This symbol indicates hazardous voltages.
The C-tick mark is a registered trademark of the Spectrum
Management Agency of Australia.
This symbol indicates that the instrument requires alternating
current (ac) input.
The CE mark is a registered trademark of the European Community.
If it is accompanied by a year, it indicates the year the design was
proven.
The CSA mark is a registered trademark of the Canadian Standards
Association.
1SM1-A
This text indicates that the instrumentis an Industrial Scientific and
Medical Group 1 Class A product (CISPER 11, Clause 4).
ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is OFF or in
STANDBY position.
v
Advertisement
Table of Contents
