Parts And Components; Before Use; Operation - cecotec FAST&FURIOUS 4050 X-TREME Instruction Manual

1. PARTS AND COMPONENTS

Fig. 1.
1. Plate
2. Continuous steam slide button
3. Steam trigger
4. Handle
5. Water tank button
6. Removable water tank
7. Power/steam level light indicator
8. Power/steam power level button
9. Brush attachment

2. BEFORE USE

Take the product out of the box.
Make sure all the accessories are included and check for any visible damage. If any is observed,
contact the Technical Support Service of Cecotec.
Remove any packaging materials, stickers or protective foil attached to the main body or the
cord.
To reduce the risk of burns and damage, check the appliance before each use by holding it away
from body and operating the steam button.
Note: Using distilled, purified or filtered water is highly recommended to maintain optimal
performance. Tap water contains minerals that build up over time.

3. OPERATION

Note: It is normal to feel or hear the water pump in the handle. This feeling or noise could
become more louder or more noticeable when the water tank is empty.
Connect the appliance to the power supply.
Press the power/steam power level button to turn the device on. The light indicator will flash,
and the device will start preheating. Then, the light indicator will turn steady on indicating the
preheating process is over and the device is ready to use. The preheating process will take
about 35 seconds.
Press the power/steam power level button again, 2 of the steam power level indicator grids
will light up, indicating the medium steam power level is activated.
Press the power/steam power level button again, 3 of the steam power level indicator grids
FAST&FURIOUS 4050 X-TREME
ENGLISH
31