Safety Instructions - cecotec FAST&FURIOUS 4050 X-TREME Instruction Manual

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
All safety instructions should be closely followed when using
the appliance.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
If the cord is damaged, it must be replaced by the official
Technical Support Service of Cecotec in order to avoid any type
of danger.
Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug or switching on the appliance.
If the appliance falls accidentally in water, unplug it
immediately. Do not reach into the water!
Do not twist, bend, strain, or damage the power cord in any
way. Protect it from sharp edges and heat sources. Do not let
it touch hot surfaces. Do not let the cord hang over the edge of
the surface.
Never hold the steam head down while at rest or tilt it in a
backward position as this may result in hot water discharge
and possibly injury.
This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Turn off and unplug the appliance from the mains supply when
not in use and before cleaning it. Pull from the plug, not the
cord, to disconnect it from the outlet.
This appliance is designed to iron textiles. It is designed for
domestic use only and, therefore, not suitable for commercial