Chapter 3; System Settings On Your Smart System; Setting Your Smart Trainer/Protrainer To Perform As Desired; Game Button: View In Video Format At - SMART Trainer Getting Started User Manual

Multisensory brain-body fitness training
Table of Contents

Advertisement

System Settings on Your SMART System

http://multisensoryfitness.com/customer-resources/getting-started-and-settings/

Setting Your SMART Trainer/ProTrainer To Perform as Desired

Power On/Off:
The on/off switch is located on the Time-Display Box near the power connect cord. When
http://multisensoryfitness.com/power-on-your-device/
powering on, the system will take 3 seconds to check that all components are working properly.
Please DO NOT TOUCH it during this check or your system will display an error message. If this
occurs, simply turn the system off, wait for 3 seconds, then restart.
The remote control is your tool to select game, level, time, volume, and
Remote Control
system settings. By pressing the indicated button you can sequentially
scroll through the available choices. Your SMART system can be
programmed for a variety of functions. The option descriptions are as
follows:
http://multisensoryfitness.com/selecting-a-game-on-your-smart-trainer-or-protrainer/

Game button: View in video format at:

When the Game button is pressed, it will interrupt the system from
attract mode, or it will interrupt a game that is currently being
played, and take the system into set-up mode. Pressing Game
again will increase the game number to the next one.
When the Game button is pressed, all stations in the system will
turn on the targets to allow for game selection. This will hold for 2
seconds. If there is no input given it will set up the game ready for
play. Press the Game button once after this two seconds and the
system will go first to the setting mode, while another press will
move the system on to the next game.
Top Left Target (Target 1) is a toggle to turn the auto-reset feature
of the system on and off. When the toggle is on it will display a
green "1" and games will automatically restart after the end of a
game. When off it will display a red "0." This will require the
trainer to reset each game using the remote control.
Center Target (Target 3) is lit with the "#" symbol to indicate game
number. A hit to this target will count the games up by 100's. The
system will remember the last game number played in that suite and change only by the
hundreds. For instance, if one is game 112, and the center target is hit, it will change to
the game last played in suite 400, 500, 600... back to 000. Upon return to the suite of
100's it will again go to 112.
© 2015 Multisensory Fitness, Inc. • www.multisensoryfitness.com

Chapter 3

1
#
-
+
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Protrainer

Table of Contents