Installation - Viking Range TurboChef 7 Series Installation Manual

Professional speedcook ovens
Table of Contents

Advertisement

Installation

• BE SURE that support for this appliance is
perpendicular to the front facing of the wall or
cabinet before you perform the installation.
• It is recommended to use standard 2 x 4 support
posts with a minimum of 3/4" (1.9 cm) solid base
to support the oven. Support posts should be
level with the fl oor line and well-secured to the
base of the cabinet. Base cabinet support must
be able to support the oven's weight - 410 lbs.
(186 kg).
• Use of a hydraulic lift is recommended for the
installation of double oven units.
• All openings in the wall behind the appliance
or in the fl oor under the appliance should be
sealed.
• Keep appliance area clear and free from
combustible materials, gasoline and other
fl ammable vapors.
• WARNING: DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE. SUCH USE MAY RESULT IN
FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL
INJURY.
Cabinet Skid Plate and Side Rails
Two 21" (53.3 cm) slide rails and one 28" (71.1
cm) skid plate have been included to help
install the oven into your cabinet more easily by
providing a fl at smooth surface on which to slide
the oven into place. The skid plate and slide rails
are fl at metal strips with adhesive tape strips on
one side.
Attach the skid plate before installing the two
slide rails. If possible, the rails should be placed
on top of any studs that might be located under
the cabinet interior fl oor.
1. Remove adhesive backing from skid plate.
Center across the inside front of the cabinet
opening with fl ange and screw locations
on front outer edge. Screw into place with
enclosed screws.
2. Remove adhesive backing from one of the
slide rails.
3. Place the slide rail left of the center line on the
cabinet fl oor (adhesive side down) fl ush with
the outer edges of the skid plate. Press the
slide rail down fi rmly against the cabinet fl oor.
4. Repeat step 3 for the second slide rail.
1
adhesive
strips
Remove wooden brace on front of pallet.
12
Cabinet Floor Center Line
Skid plate
Remove the outer
corrugated cover and all
inner packing.

Advertisement

Table of Contents
loading

Table of Contents