Viking Range VESO177C Installation Instructions Manual

INSTALLATION
INSTRUCTIONS
BUILT-IN ELECTRIC OVENS
PROFESSIONAL SERIES
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
US
IMPORTANT: PLEASE READ AND FOLLOW
1. Before beginning, please read these instructionscompletely and carefully.
2. Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
3. Pleaseobserve all local and national codes and ordinances.
4. Pleaseensure that this product is properly grounded.
5. The installershouldleave these instructions with the consumerwho should retain for local inspector'suseancl for future
reference.
Installationmust conform with local codes or in the absence of codes, the National ElectricalCode, ANSI/NFPA 70- latest edition.
IN CANADA: Installation must be in accordancewith the current CSA C22.1 Canadian ElectricalCodes Part 1 and/or local codes.
WARNING! ! !
Frame grounded by a 4-conductor cable assembly. See manufacturer's instructions
GENERAL INFORMATION
1. WARNING: The use of cabinets for storage above the appliance may result in potential fire or burn hazard.
2. WARNING: This appliance shall not be used for space heating. This information is based on safety
considerations.
3. All openings in the wall behind the appliance in the floor under the appliance shall be sealed.
4. Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.
5. Disconnect the electric supply to the appliance before servicing.
6. When removing oven for service and/or cleaning
A. Disconnect AC power supply.
B. Carefully remove the oven by pulling outward. CAUTION: Oven is heavy, use care in handling.
7. Electrical requirements:
Listed in specifications chart p. 4 and 7 under Electrical Requirements.
8. The misuse of the oven doors (e.g. stepping, sitting, or leaning on them) can result in possible hazards and/or
injuries.
WARNING! !!
ELECTRICAL GROUNDING INSTRUCTIONS
This oven must be electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, ANSI/NFPA 70 - latest edition.