Procedure For Resetting The Camera - Motorola MBP88CONNECT User Manual

6. Procedure for Resetting the Camera

Note: If your Camera is moved from one router (e.g. home) to another (e.g.
office) or you have Camera setup issues, then the Camera must be reset. Please
reset the Camera with the following procedures:
1. Slide the ON/OFF switch to OFF.
2. Press and hold the PAIR button, then slide the ON/OFF switch to ON.
3. Release the PAIR button when you hear a confirmation beep and wait for
the Camera Unit to compete an internal reset procedure. The LED
indicator will turn red and flash slowly when the Camera Unit is reset
successfully.
4. You can add your Camera again by following the steps in section 3.2.4 for
Android devices or in section 3.3.4 for iOS devices.
Procedure for Resetting the Camera 25