Changing The Program Sequence; Changing A Program Once It Has Started; Cancelling A Program; Reselecting A Cancelled Program - Miele PDR 908 HP Operating And Installation Instructions

Changing the program sequence

Payment system
(If applicable)
Opening the door or cancelling the
program after it has started may cause
a loss of credit (depending on how the
tumble dryer was set up*).
* Either during the commissioning
process or subsequently, Miele Service
can reset the payment system so that
programming changes can be made.
Changing a program once it
has started
You cannot change to another program
once a program has started (this
prevents unintentional alterations). You
will need to cancel the current program
before you can select a new one.

Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the tumble dryer and the
surroundings.
See "Important safety instructions"
for further information.

Cancelling a program

 Touch the Start/Stop sensor control.
A message will appear in the display
asking if you wish to cancel the
program.
 Touch the
Yes sensor control.
44

Reselecting a cancelled program

 Open and close the door.
 Select and start a new program.

Adding laundry

 Open the door.

Risk of burns by touching hot
laundry in the drum.
You could burn yourself.
Let the laundry cool down and
remove it carefully.
 Add items.
 Close the door.
 Start the program.
Interruption to the power
supply
If the power supply is interrupted
because the tumble dryer has been
switched off with the button :
 Switch the tumble dryer on.
 Touch the Start/Stop sensor control.
If the power supply is interrupted by a
power cut:
 When power is restored, confirm with
OK .
 Touch the Start/Stop sensor control.
Time left
Altering the program sequence can
cause the program duration shown in
the display to be adjusted.