Konica Minolta bizhub C3350i Quick Manual page 23

6
6.2 Loading paper
No paper setting is required because frequently used pa-
per is loaded during general use.
This section describes how to use paper that is not usu-
ally loaded into a paper tray.
The methods for loading envelopes and postcards are as
follows.
6.2.1 Loading paper in Tray1
Up to 500 sheets of plain paper can be loaded into Tray
1.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick
paper, postcard (4 e 6 (A6 Card)), letterhead, colored pa-
per, envelope, label sheets, recycled paper, and coated
paper
How to load paper
1
Pull out the tray.
NOTICE
Be careful not to touch the surface of the Paper Feed
Rollers with your hand.
2
Slide the Lateral Guide to fit the size of the loaded
paper.
22
3
Load paper into the tray with the print side facing
up.
4
When you load paper other than plain paper or
change the paper size, specify the paper type and
paper size.
% For details on how to specify the paper type and
paper size, refer to the HTML User's Guide.
6.2.2 Loading paper into the Bypass
Tray
When selecting a paper size other than for paper trays,
use the Bypass Tray.
To use the Bypass Tray, specify the paper type and pa-
per size.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick
paper, postcard (4 e 6 (A6 Card)), letterhead, colored pa-
per, envelope, label sheets, recycled paper, and coated
paper
How to load paper
1
Open the Bypass Tray.
NOTICE
Be careful not to touch the surface of the Paper Feed
Rollers with your hand.
bizhub C4050i/C3350i