Fan Control; Color Calibration; White Calibration - Chauvet Q-WASH 260-LED User Manual

Fan Control

Color Calibration

White Calibration

Q-Wash 260-LED User Manual Rev. 05
This option defines how you can control the fan speed, whether with the DMX controller or
only from the control panel.
1. Go to MENU > SPECIAL > FAN.
2. Select DMX or SYSTEM.
DMX: Enables the DMX controller to control the fan speed (Control function).
SYSTEM: Restricts the control of the fan speed to the control panel..
If necessary, you may adjust the color temperature of each of the macros (White1~11).
1. Go to MENU > EXTRA.
2. Press <ENTER> (PASSWORD) will show on the display.
3. Press <ENTER> (**** will show on the display).
4. Enter the password, as explained in Keylock (CALIB will show on the
display).
5. Press <ENTER> (3200K will show on the display).
6. Use <UP> or <DOWN> to select another color temperature (3400~10000 K),
or press <ENTER> to edit the current temperature.
7. Select RED, GREEN, or BLUE.
8. Select a value (000~255).
9. Repeat for the other colors.
You may calibrate the white color shown when the RGB faders are at "255" and the
MENU > SPECIAL > COLOR setting is RGBTOW.
1. Go to MENU > EXTRA.
2. Press <ENTER> (PASSWORD) will show on the display.
3. Press <ENTER> (**** will show on the display).
4. Enter the password, as explained in Keylock (CALIB will show on the
display).
5. Press <ENTER> (3200K will show on the display).
6. Use <UP> or <DOWN> to select RGBW.
7. Select RED, GREEN, or BLUE.
8. Select a value (000~255).
9. Repeat for the other colors.
Operation
-13-