Reset Control; Move-In Black; Power; Color Settings - Chauvet Q-WASH 260-LED User Manual

Operation

Reset Control

Move-in Black

Power

Color Settings

-12-
It is possible to select how you can reset the product, whether with the DMX controller or
only from the control panel.
1. Go to MENU > SPECIAL > RESET.
2. Select DMX or SYSTEM.
DMX: Enables the DMX controller to reset the product (Control function).
SYSTEM: Restricts the reset function to the control panel..
This option allows you to activate or deactivate the move-in black 3-seconds delay.
1. Go to MENU > SPECIAL > BLACK.
2. Select YES to enable the 3 seconds delay or NO to make the blackout
immediate.
You may use this function to boost the output power for specific, short-term applications.
1. Go to MENU > SPECIAL > POWER.
2. Select NORMAL or HIGH.
The product will return to Normal if the LEDs' temperature becomes too high.
The COLOR setting determines how the Q-Wash 260-LED generates the white color
based on various RGB settings.
1. Go to MENU > SPECIAL > COLOR.
2. Select OFF, RGBTOW, or UC.
UC: When the RGB faders are set to "255", the output matches that of less
efficient products (Universal Color).
RGBTOW: When the RGB faders are all set to "255", the resulting output is defined by
RGB-W (see MENU > EXTRA > CALIB).
OFF: When the RGB faders are all set to "255", the output is maximum, although
the resulting white color may not be balanced.
Q-Wash 260-LED User Manual Rev. 05