Menu Map - Chauvet Q-WASH 260-LED User Manual

Menu Map

Q-Wash 260-LED User Manual Rev. 05
st nd
1 Level 2 Level
ADDRESS
RESET
FAN
RUN
INTRO
CHANNELS
DISPLAY
KEYLOCK
DIMMER
INFO
PAN
TILT
INVERT
DIMMER
USE
P/START
P/FINISH
RANGE T/START
T/FINISH
USE
BLACKD
RESET
POWER
SPECIAL
COLOR
FAN
STEP
PAN
TILT
EDIT SPEED
RED
GREEN
BLUE
Continues on the next page
rd
3 Level
001~512 Selects a starting DMX address
NO/YES Resets the product's custom settings
HIGH
Select the fan's operation mode.
NORMAL
NOTE: The fan will go to High mode if the product's
internal temperature becomes too high, despite any
LOW
manual or DMX setting
AUTO
DMX512 Selects DMX running mode
AUTO 1 Selects the first automatic program
AUTO 2 Selects the second automatic program
CUSTOM Selects the user customizable program
SLAVE
Selects the Slave running mode
TEST Starts the product's test sequence
BASIC Selects the 9-channel DMX mode
ADVANCED Selects the 12-channel DMX mode
60 CLOSE Turns off the display after 60 seconds
BRIGHT Keeps the display on
NO/YES Activates/deactivates the control panel password
DIMMER4~1 Slow (DIMMER4) to fast (DIMMER1) dimmer curves
DIMMER0
Linear dimmer
EDITION Shows the version of the installed S/W
Defines the direction of the pan fader
NORMAL/
Defines the direction of the tilt fader
REVERSE
Defines the direction of the dimmer fader
NO/YES Activates the changes
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
000~255
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
Activates the changes
NO/YES Activates the move-in black delay (3 s)
DMX The DMX controller can reset the product
SYSTEM The control panel can reset the product
LEDs illuminate at normal or high intensity
NORMAL/
NOTE: The product will return to Normal if the LEDs'
HIGH
temperature becomes too high
UC RGBW = 255: The output matches that of older products
RGBTOW RGBW = 255: The RGBW output is set by RGB-W
OFF RGBW = 255: The RGBW output is maximum
DMX
The DMX controller can set the fan speed
SYSTEM The control panel can reset the fan speed
Selects the program step
Selects the pan position
Selects the tilt position
000~255 Selects the pan/tilt speed
Combines red, green, and blue to obtain a custom color
Operation
Description
-15-