VEE Measurement Program Operation
Measurement
Track Search
Overview
This section describes the track search measurement. This function allows you to write a
track by one head and then read it by another head.
Measurement
Procedure
NOTE
Before the track search is performed, the toggle switch of "Measure R/W offset after head
is moved" must be not checked.
Figure 3-122
Setup Menu
1. To open the Track Search menu, click on the [Track Search] button of the Measure
202
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
menu.
Chapter 3