Nikon VQA060AA Reference Manual page 50

y M X Night landscape
On the screen displayed when X Night landscape is selected, select u Hand-held
(default setting) or w Tripod.
u Hand-held (default setting):
- Press the shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
- Vibration reduction is disabled regardless of the Vibration reduction setting
(A171) in the setup menu.
- See "Using a Tripod" (A23) when using a tripod.
y M k Close-up
On the screen displayed when k Close-up is selected, select Noise reduction burst or
Single shot.
Noise reduction burst: This enables you to shoot a sharp image with a minimum of
noise.
- Press the shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
Single shot (default setting): Saves images with emphasized outlines and contrast.
- One image is captured when the shutter-release button is pressed all the way.
The focus mode (A61) setting is changed to D (macro close-up) and the camera
automatically zooms to the closest position at which it can focus.
You can move the focus area. Press the k button, use the multi selector HIJK or
rotate it to move the focus area, and press the k button to apply the setting.
Shooting Features
Scene Mode (Shooting Suited to the Shooting Conditions)
36