Nikon VQA060AA Reference Manual page 231

6
Press and hold (for at least three seconds) the power button on
the remote control.
Pairing starts for the camera and remote control. While the process is being
performed, the status lamp on the remote control flashes about every 0.5 second.
When pairing is complete, a connection is
established between the camera and the remote
control. When you enter shooting mode, the Z
icon is displayed on the shooting screen.
If a pairing failure message is displayed, perform
the procedure again from step 5.
Switching the Connection to a Smart Device
Switch the connection from Remote control to Smart device in Choose
connection in the camera network menu (A161, 216).
When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device, the s icon is displayed on the
shooting screen.
See the included "SnapBridge Connection Guide" when establishing a wireless
connection with a smart device for the first time.
Technical Notes
ML-L7 Remote Control
217
2 5 m 0 s 2 5 m 0 s
1 / 2 5 0 1 / 2 5 0 F 5 . 6 F 5 . 6 1 4 0 0 1 4 0 0