Table of Contents
Advertisement
Problem
The camera
does not
respond when
operating the
ML-L7 Remote
2
Control.
Cannot be
Check the Network menu settings on the camera.
paired with the
ML-L7 Remote
2
Control.
Images saved in
If the number of images saved on a memory card in the
the camera are
camera exceeds 10,000, images captured thereafter may not
not displayed
be displayed in a connected device.
on a connected
smart device or
computer.
Images are not
displayed on TV.
Nikon Transfer 2
does not start
when the
camera is
connected to a
computer.
The PictBridge
With some PictBridge-compatible printers, the PictBridge
screen is not
startup screen may not be displayed and it may be impossible
displayed when
to print images when Auto is selected for Charge by
the camera is
computer in the setup menu. Set Charge by computer to
connected to a
Off and reconnect the camera to the printer.
printer.
Images to be
printed are not
The memory card contains no images.
displayed.
The camera cannot be used to select the paper size in the
Cannot select
following situations, even when printing from a PictBridge-
paper size with
compatible printer. Use the printer to select the paper size.
the camera.
1
See the included "SnapBridge Connection Guide" and SnapBridge online help.
2
Refer to the User's Manual provided with the ML-L7 Remote Control (available separately).
Technical Notes
Troubleshooting
The camera is not connected to the ML-L7 Remote Control
(available separately). Press the power button on the remote
control to establish the connection. If the Z icon is not displayed
on the shooting screen, perform pairing again.
The remote control can be used only for shooting operations.
w1 (Function 1) / w2 (Function 2) buttons on the
remote control cannot be used with this camera.
Select Remote control in Choose connection.
Set Airplane mode to Off.
Set Bluetooth M Connection to Enable.
Reduce the number of images saved on the memory card.
Copy the necessary images to a computer, etc.
A computer or printer is connected to the camera.
The memory card contains no images.
The camera is off.
The battery is exhausted.
The USB cable is not correctly connected.
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer 2,
refer to help information contained in ViewNX-i.
The printer does not support the paper sizes specified by the camera.
The printer automatically selects the paper size.
Cause/Solution
207
A
216
213
214
161
–
–
–
103,
179
103,
109
–
–
113,
179
–
–
Advertisement
Table of Contents
