Table of Contents
Advertisement
Problem
Screen for
The clock battery is exhausted; all settings were restored to
setting time
their default values. Configure the camera settings again.
zone and date is
displayed when
the camera is
turned on.
The camera
settings reset.
Although a new folder is created on the memory card by
resetting file numbering, etc., if the sequential number of a
Reset file
folder name (which is not displayed on the camera) reaches
numbering
the upper limit ("999"), reset is not possible. Change the
cannot be done.
memory card, or format the memory card.
When Autofocus mode is set to Full-time AF or while in
The camera
some shooting modes, the camera may produce an audible
makes sound.
focusing sound.
Shooting Issues
Problem
Cannot switch
to shooting
Disconnect the USB cable.
mode.
Cannot take
pictures or
record movies.
Technical Notes
Troubleshooting
The internal clock battery is used to power the camera clock
and to retain certain settings. Charging time of the clock
battery takes about 10 hours when you insert the battery
into the camera or connect the AC adapter (available
separately) to the camera, and the clock battery operates for
several days even after the camera battery is removed.
The write-protect switch is in the "lock" position.
Slide the write-protect switch to the "write" position.
When the camera is in playback mode, press the c button,
shutter-release button or b (e) button.
When menus are displayed, press the d button.
When the scene mode is Night portrait or Backlighting
with HDR set to Off, raise the built-in flash.
The built-in flash is charging while q is flashing.
The battery is exhausted.
Insert a memory card with sufficient free space.
Cause/Solution
Cause/Solution
201
A
–
176,
183
31,
143,
153
A
103
2, 27
114
25, 35,
37
55
17, 191
16
Advertisement
Table of Contents
