SIIG JU-EX0111-S1 Quick Installation Manual

Usb 2.0 4-port extender

Advertisement

Quick Links

Introduction

The USB 2.0 4-Port Extender, using inexpensive CATx
cabling, extends the distance to four USB devices up to 80
meters.

Features and Benefits

Extends USB distance up to 80 meters via CATx
cable
Connect up to 4 USB devices
Supports high-speed USB 2.0 devices and
backward support for USB 1.1 devices
Supports USB 2.0 data transfer rate up to
480Mb/s
The extender requires no additional driver
installation
Supports hot-swap & Plug-and-Play

System Requirement

Notebook or Desktop PC with an available USB
port
04-0877A
USB 2.0 4-Port Extender
Quick Installation Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JU-EX0111-S1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG JU-EX0111-S1

  • Page 1 USB 2.0 4-Port Extender Quick Installation Guide Introduction The USB 2.0 4-Port Extender, using inexpensive CATx cabling, extends the distance to four USB devices up to 80 meters. Features and Benefits • Extends USB distance up to 80 meters via CATx cable •...
  • Page 2 Package Contents • USB Extender 4-Port Extender-Transmitter • USB Extender 4-Port Extender- Receiver • USB 2.0 type A (M) to Type A (M) cable • Power adapter • Housing rubber pads (8) • Quick installation guide Layout Transmitter OUTPUT UTP/STP Power LED Figure 1: Front Panel •...
  • Page 3 DC 5V USB Input Figure 2: Rear Panel • DC 5V: Connects to the included Power Adapter. Note: This connection is optional and only needed when your USB devices are not detected by the Receiver. • USB Input: Connects to an available USB 2.0 port on your computer using the included USB 2.0 Type A to Type A cable •...
  • Page 4 • Power LED: On when the Transmitter is powered DC 5V OUTPUT UTP/STP Figure 4: Rear Panel • DC 5V: Connects to the included 5V DC power adapter • OUTPUT UTP/STP: Plug your CATx cable into this port, up to 80 meters maximum •...
  • Page 5 Plug the power adapter to the Receiver's 5V DC power jack. The extender is ready for use. Transmission Distance Adjustment Push the EQ button on both Transmitter and Receiver to adjust for the length of the CATx cable. Figure 5 •...
  • Page 6 Application Desktop or notebook PC cable Transmitter CATx cable Receiver cable USB device (printer, HDD docking, USB capture cable, etc) Figure 6...
  • Page 7 RMA number posted on the outside of the shipping carton. • You are responsible for the cost of shipping to SIIG. Ship the product to the following address: SIIG, Inc. 6078 Stewart Avenue...
  • Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB 2.0 4-Port Extender is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.

Table of Contents