Table of Contents
Advertisement
X10DDW-i/iN Motherboard User's Manual
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a
terminal emulator designed for the Windows OS. The options are VT100, LINUX,
XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS Post
Use this feature to enable or disable legacy Console Redirection after BIOS
POST (Power-On Self-Test). When the option-Bootloader is selected, legacy
Console Redirection is disabled before booting the OS. When Always Enable
is selected, legacy Console Redirection remains enabled upon OS bootup. The
options are Always Enable and Bootloader.
SOL/COM2 Console Redirection
SOL/COM2 Console Redirection
Select Enabled to use the SOL/COM2 port for Console Redirection. The options
are Enabled and Disabled.
*If the item above set to Enabled, the following items will become available for
user's configuration:
SOL/COM2 Console Redirection Settings
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirec-
tion. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set.
Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or
more bytes. The options are ANSI, VT100, VT100+, and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 (Bits) and 8 (Bits).
4-26
Advertisement
Table of Contents
