Table of Contents
Advertisement
System
Management
Dimensions
Note 1: CPU Maximum Thermal Design Power (TDP) is subject to chassis
and heatsink cooling restrictions. For proper thermal management, please
check the chassis and heatsink specifications for proper CPU TDP sizing
Note 2 Please install both CPUs for full access to the PCI-E slots, DIMM
slots, and onboard controllers. Refer to the block diagram on page 1-10 to
determine which slots or devices may be affected. Please populate CPU
socket 1 first.
Note 3: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for On/Off control
•
CPU Thermal Design Power (TDP): support up to
145W (See Note 1 below)
Fan Control
•
Fan status monitoring via IPMI connections
•
Single cooling zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis Intrusion header and detection
•
13.40" (L) x 12.80" (W) (340.36 mm x 325.12 mm)
1-9
Chapter 1: Overview
Advertisement
Table of Contents
