Supermicro X10DDW-i User Manual page 15

Motherboard Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel E5-2600v3/v4 processors (Socket R3-LGA
®
2011); each processor supports dual full-width Intel
QuickPath Interconnect (QPI) links (of up to 9.6 GT/s
one direction per QPI)
Note: E5-2600v4 requires Revision 2.0 BIOS
(or higher).
•
Integrated memory controller supports up to 2048
GB of Load Reduction (LRDIMM), and up to 512
GB of Registered (RDIMM) DDR4 (288-pin) ECC
2400/2133/1866/1600 MHz memory in 16 slots (2
DIMMs per channel).
Note: Memory speed support is pending on the
processors installed in the system. For the lat-
est CPU/memory updates, please refer to our
website at http://www.supermicro.com/products/
motherboard.
DIMM sizes
•
DIMM Up to 128GB @ 1.2V
•
Intel® PCH C612
•
One (1) SMCI-proprietary CPU1 PCI-E 3.0 x16
+ CPU2 PCI-E 3.0 x16 slot w/riser-card support
(SXB1B)
•
One (1) PCI-E 3.0 x8 for LP (Low-Profile) riser-card
support (SXB2)
•
One (1) PCI-E 3.0 x8 Mezzanine slot w/SAS support
(JMEZ1)
•
Graphics control via Aspeed AST 2400 BMC
•
Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet con-
troller for LAN 1/LAN 2 ports
•
Aspeed AST 2400 Baseboard Controller (BMC) sup-
ports IPMI_LAN 2.0
SATA/SAS Support
•
SATA Ports
•
RAID
1-7
Chapter 1: Overview
Ten (10) SATA 3.0 ports (I-SATA
0-3, S-SATA0-3, I-SATA4/5*) (*I-
SATA4/5 support SuperDOMs)
RAID 0, 1, 10, 5