Supermicro X10DDW-i User Manual page 14

X10DDW-i/iN Motherboard User's Manual
SXB1B
(JSXB1_1/1_2/1_3)
SXB2
UID (JUIDB1)
(BP) USB 0/1
(FP) USB 2/3
(BP) USB 4/5 (3.0)
USB 6 (3.0)
VGA
LED Description
LE1 Rear UID LED
LE2 Onboard PWR LED
LEDM1 BMC Heartbeat LED
Note: For SAS 3.0 support, be sure to install the Mezzanine card on Slot
JMEZ1. Refer to Section 1-8 (P. 1-14) and Section 2-6 for more information.
Warning!
To avoid damaging the power supply or the motherboard, be sure to use a power
supply that contains a 24-pin and two 8-pin power connectors. Be sure to connect the
power supply to the 24-pin power connector (J24), and two 8-pin power connectors
(JPWR1, JPWR2) on the motherboard. Failure in doing so may void the manufacturer
warranty on your power supply and motherboard.
SMCI-proprietary CPU1 PCI-E 3.0 x16 + CPU2 PCI-E
3.0 x16 slot w/riser-card support
CPU1 PCI-E 3.0 x8 slot for low-profile (LP) riser-card
support
Unit Identified (UID) button
Backpanel USB 2.0 Ports 0/1
Front accessible USB 2.0 connection header 2/3
Backpanel USB 3.0 connections 4/5
USB 3.0 Type A connection header 6
Backpanel VGA port
X10DDW-i/iN LED Indicators
State
Blue: On
On
Green: Blinking
1-6
Status
Unit Identified
System Power On
BMC Normal