Keys And Indicators - Axis AG Series User Manual

____________________________________________________________________________________________________________________

5. Keys and indicators

 
T
 
0
ENTER
.
1/F1 ... 5/F5
 
6 / 0
7 /
8 /
9 / MENU

0 /
∧
∨
>
<
I /
indicator
linear indicator
OFF indicator
decrease of last
digit
Max, Min, d, e, II - metrological parameters of the balance.
USER MANUAL
- taring (enter mass subtracted from weighed mass)
- zeroing (option),
- confirmation / choosing an option,
- decimal point,
- numeric key / functional key,
- numeric key / zeroing (only for balances for direct sale),
- numeric key / result printout (transmission),
- numeric key / internal calibration,
- numeric key / enter menu,
- numeric key / change mode of balance work,
- navigation: go to option above,
- navigation: go to option below,
- navigation: enter into option,
- navigation: exit from option,
- switch on / switch off (standby),
- shows stabilization of weighing result,
- indicator of balance load (0-100%),
- appears after the balance is switched off with I /
- informs that reading unit value is lower than acceptable
indication error (balances with legal verification, de)
7
key,