Pieces Counting Function - Axis AG Series User Manual

____________________________________________________________________________________________________________________

14.2 Pieces counting function

Pieces counting function allows determining the number of items in weighed
sample according to:
1. Reference sample with known number of pieces (unitary mass is not known),
2. Unitary mass of an item.
1. Unitary mass is not known but user has got a sample.
Max ... Min ...
0%
USER FUNCTIONS&OPT.
Autotaring
PCS counting
. . .
USER FUNCTIONS&OPT. \ PCS COUNTING
1.Activate
2.Sample quantity
3.Unit weight
4.Exit
USER FUNCTIONS&OPT. \ PCS COUNTING
1.Activate
2. Sample quantity :
3. Unit weight
4. Exit
Max ... Min ...
0%
To stop the function press Menu key, choose PCS counting function and then
choose Deactivate option.
Note:
In order to show mass value temporarily and return to pieces indication press 
key.
USER MANUAL
e= ... d= .. II
2.000
g
100%
: none
12
e= ... d= ..
PCS
12
pcs
100%
Place a sample with known number of
pieces on the pan.
Press Menu key to enter the user
function menu, choose PCS counting
with the cursor and press ENTER key.
Choose Sample quantity option and
press ENTER key.
Using numeric keys enter the quantity
of pieces in the sample and press
ENTER key.
The balance calculates unitary mass of
an item (unit weight) basing on given
number of pieces and sample weight
and then shows number of pieces on the
display.
If a change of sample parameters is not
required during next use of the function,
start the function choosing Activate
option and pressing ENTER key.
21