Statistical Calculations Function - Axis AG Series User Manual

48
____________________________________________________________________________________________________________________

14.19 Statistical calculations function

This function allows for calculations of mean value, standard deviation, relative
standard deviation, maximum and minimum value, and making the histogram of
performed series of measurements.
USER FUNCTIONS&OPT.
Autotaring
PCS counting
. . .
Statistic
USER FUNCTIONS&OPT.\ STATISTIC
1. Activate
2. Reset
3. Mode:
4. Printout:
5. Number of samples
6. Nominal value
7. Tolerance
8. Tare after stat.
USER FUNCTIONS&OPT.\ STATISTIC
1. Activate
2. Reset
3. Mode:
4. Printout:
5. Exit
USER FUNCTIONS&OPT.\ STATISTIC
1. Activate
2. Reset
3.Mode:
4. Printout:
5. Exit
Max ...
n=1
AUTO
0%
INSTRUKCJA OBSŁUGI
autom.
ON
<autom.>
ON
autom.
ON
Min ... e= ... d= ..
0.000
g
100%
Press MENU key to enter the user
functions menu, select Statistics with
cursor and press ENTER.
Using keys ∨ and ∧ move cursor to
Operation mode, and using < and >
keys select the process beginning
method:
- manual – after pressing ENTER,
- autom. – after
stabilization.
Confirm by pressing ENTER.
When required, move cursor to Print
and select:
- ON – printing
measurements,
- OFF – successive measurements
without printing.
Confirm by pressing ENTER.
The following
inserting maximal
samples, inserting nominal value and
sample tolerance in %.
Using ∨ and ∧ keys, move cursor to
Activate and press ENTER.
The balance is ready for the series of
samples measurements, for which the
statistical parameters
calculated.
To perform the measurement just put
the sample, wait for stabilization and
remove sample.
results are sent to the printer.
indications
of successive
options enable
quantity of
will be
The successive