FMI VTDGT24NR Manual page 13

Figure 21A - Installing Front Left Log Side View
Grate Finger
Figure 21B - Installing Front Left Log
4. Find the charred log (D-020). See Figures 22, 22A, and
22B. The log has a slot in the bottom that fits over the
square grate and rests against the burner tube as shown in
Figure 22. Place this log on the base as shown in figures.
Charred Log
Right Front Log
Figure 22 - Installing Charred Log
125598-01D
INSTALLATION
Log Slot
Log Notch
www.fmiproducts.com
Continued
Figure 22A - Installing Charred Log Top View
Figure 22B - Installing Charred Log Top Side View
5. Find the middle split log (LMF36-SC and VFGT24 inch
models: D-063 or LMF42-SC and VFGT30 inch models:
D-021 or LMF48-SC and VTGF36 inch models: D-028).
See Figures 23 and 23A. The split side of the log faces
forward. The log has a notch that fits around the burner
tube on the right side. The left side of the burner tube fits
into the notch on the back side of this log. The log is placed
properly when it sits parallel to the tube burner and the
square peg is pointing up. See figures for reference.
Middle Split Log (D-063,
D-021 or D028)
Figure 23 - Installing Middle Split Log (D-021)
Square Grate
Log Notch
Square Peg
13