Table of Contents
Advertisement
Burner Tube
Figure 19B - Installing Right Front Log, Top View
Figure 19C - Installing Right Front Log, Side View
2. Find the back left log (LMF36-SC and VFGT24 inch models:
D-060 or LMF42-SC and VFGT30 inch models: D-018 or
LMF48-SC and VFGT36 inch models: D-026). See Figures
20, 20A, and 20B. Figure 20A shows how the log must fit
against the end of the burner. Figure 20B shows how the
notch in log fits against the vertical portion of the burner tube.
Place this log on the base assembly by inserting it from the
left side as shown in Figure 20. You will need to twist the log
slightly to get it to fit against the burners properly. It will rest
even with the back edge of the pan.
Back Left Log (D-060,
D-018 or D026)
Log Notch
Figure 20 - Installing Back Left Log
12
Square Grate
Flat Part of Log
Burner Tube
www.fmiproducts.com
INSTALLATION
Continued
Log Notch
Burner Tube
Figure 20A - Installing Back Left Log
Vertical Portion of Burner Tube
Figure 20B - Installing Back Left Log (D-018) Rear View
3. Find the front left log (LMF36-SC and VFGT24 inch models:
D-059 or LMF42-SC and VTGF30 inch models: D-017 or
LMF48-SC and VFGT36 inch models: D-025). See Figures
21, 21A, and 21B. The log has a rectangular stand off on
the bottom that fits against the lip on the black metal base
as shown in figure 21A, page 13. The bottom of this log
has a slot that fits over the second bar on the grate as
shown in Figure 21B, page 13. Place the log on the base
assembly as shown in figures.
Front Left Log (D-059,
D-017 or D025)
Figure 21 - Installing Front Left Log
Grate Fingers
125598-01D
Advertisement
Table of Contents
