Advertisement
Black Electric Single Motor Desk Frame
Instruction Manual
SKU: DESK-V100EBY
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v100eby
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo DESK-KIT-1B5B
Summary of Contents for Vivo DESK-KIT-1B5B
- Page 1 Black Electric Single Motor Desk Frame Instruction Manual SKU: DESK-V100EBY Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v100eby GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
-
Page 2: Electrical Safety Instructions
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. -
Page 3: Tools Needed
TOOLS NEEDED Phillips Screwdriver Drill ASSEMBLY STEPS STEP 1 Place the feet (1) on the legs (2, 3) as shown. Insert and tighten M6x16 bolts (A) using the 5mm Allen wrench (C). - Page 4 STEP 2 Loosen the four set screws on the telescopic crossbar (4) using the 4mm Allen wrench and adjust the crossbar length to suit the desktop. Attach the telescopic crossbar to the legs as shown using M8x50mm bolts (B), and tighten with the 5mm Allen wrench. Retighten all screws. Loose Stretch STEP 3...
- Page 5 STEP 4 Attach the side brackets (6) to both ends of the frame with top portions facing out using four M6x16mm bolts (A). For small desktops down to 33.4" in width, attach brackets so top portions are instead facing in towards the center.
- Page 6 STEP 6 Assemble baffles (8) to telescopic crossbar (4) using M4x6mm bolts (E), and tighten with the 2.5mm Allen wrench (D). Baffles may be used to cover the sync rod, or they may be used in the opposite direction to support cables. STEP 7 Connect the control unit (7) to the cables from the motor (3) and controller (9).
- Page 7 CAUTION! Do not exceed desk Keep area of vertical Keep weight on desk Leave enough slack in weight limit. motion free of balanced for correct cables to allow for full obstacles. operation and longer range of vertical motion. life of components. Failure to follow these instructions may result in property damage and/or personal injury.
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-KIT-1B5B and is the answer not in the manual?
Questions and answers