Basic Operations; Get Familiar With Voice Prompt; Table 4: Ht503 Ivr Menud - Grandstream Networks HT-503 User Manual

B O
ASIC PERATIONS
G F V
ET AMILIAR WITH
HT503 has a stored voice prompt menu for quick browsing and simple configuration. Currently, the voice
prompt menu is designed for the FXS port only. Dial "***" from the analog phone to enter the voice
prompt.
T 4: HT503 IVR M
ABLE ENU
Menu Voice Prompt
Main Menu
"Enter a Menu Option"
01 "DHCP Mode",
"Static IP Mode"
02 "IP Address " + IP address
03 "Subnet " + IP address
04
"Gateway " + IP address
05 "DNS Server " + IP address
07 Preferred Vocoder
12 WAN Port Web Access
13 Firmware Server IP Address
14 Configuration Server IP
Address
15 Upgrade Protocol
16
Firmware Version
17 Firmware Upgrade
47 "Direct IP Calling"
99 "RESET"
"Invalid Entry"
Grandstream Networks, Inc.
P
OICE ROMPT
D
EFINITIONS
Options
Press "*" for the next menu option
Press "#" to return to the main menu
Enter 01-05, 07,12-17,47 or 99 menu options
Press "9" to toggle the selection
If using "Static IP Mode", configure the IP address information using
menus 02 to 05.
If using "Dynamic IP Mode", all IP address information comes from
the DHCP server automatically after reboot.
The current WAN IP address is announced
If using "Static IP Mode", enter 12 digit new IP address.
Same as menu 02
Same as menu 02
Same as menu 02
Press "9" to move to the next selection in the list:
Press "9" to toggle between enable / disable
Announces current Firmware Server IP address. Enter 12 digit new
IP address.
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
Upgrade protocol for firmware and configuration update. Press "9"
to toggle between TFTP / HTTP
Firmware version information.
Firmware upgrade mode. Press "9" to toggle among the following
three options:
Enter a 12 digit IP address to make a direct IP call, after dial tone.
(See "Make a Direct IP Call".)
Press "9" to reboot the device; or
Enter encoded MAC address to restore factory default setting (See
"Restoring Factory Settings")
Automatically returns to main menu
HT503 User Manual
Firmware 1.0.0.9
•
PCM U / PCM A
•
G.723
•
G.729
•
G.726
•
iLBC
- always check
- check when pre/suffix changes
- never upgrade
Page 9 of 37
Last Updated: 9/2007