Cleaning The Door Glazing; Removing The Internal Glass Panels - Smeg TR4110P1 User Manual

Hide thumbs Also See for TR4110P1:
Table of Contents

Advertisement

and once it is in place remove the pins
from the holes in the hinges.

4.4 Cleaning the door glazing

The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
4.5 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
Multifunction oven doors
1. Remove the internal glass panel by
pulling the top part gently, following the
movement indicated by the arrows (1).
2. Then, pull the bottom part upwards (2). In
this way, the 4 pins attached to the glass
Cleaning and maintenance
detach from their housings in the oven
door.
3. Take hold of the intermediate glass panel
and unscrew the screw to remove the
lower plate that fastens it.
Improper use
Danger of cuts and glass crack
• Pay attention to the intermediate glass
panel that could accidentally come out
of its seat during this phase.
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr4110bl1

Table of Contents