Table of Contents
Advertisement
Correct position for flame-spreader
crowns and burner caps
Before lighting the hob burners, make sure
that the flame-spreader crowns are
correctly positioned in their housings with
their respective burner caps. Make sure that
the holes in the flame-spreader crowns are
aligned with the igniters and thermocouples
(A).
Practical tips for using the hob
For better burner efficiency and to minimise
gas consumption, use pans with lids and of
suitable size for the burner, so that flames
do not reach up the sides of the pan. Once
the contents come to the boil, turn down the
flame far enough to ensure that the liquid
does not boil over.
Cookware diameters:
• Auxiliary: 12 - 14 cm.
• Semi-rapid: 16 - 24 cm.
• Rapid: 18 - 26 cm.
• Ultra-rapid: 18 - 28 cm.
Use
3.5 Teppanyaki plate
Improper use
Risk of damage to surfaces
• The plate must not be used for more than
60 minutes.
• The burners under the plate can be lit at
the same time to the maximum setting for
no more than 10 minutes. After this time
they should be set at the minimum
setting.
• After use, it is advisable to wait for at
least 15 minutes before removing the
accessory from the appliance.
Use the Teppanyaki plate on the pair of SR
burners on the right of the hob.
The Teppanyaki plate should be
positioned in place of the rack.
55
Advertisement
Table of Contents
