Factory Default Setting - Midea 1234G1A Instruction Manual

OPERATION INSTRUCTION
a. Open the door，press number button "1" for 5 seconds,"PROGRAW" displays.
b. Press number button "3", after two seconds, the screen will display there lated time.
c. Press "1","2","5" to input the cooking time. "1:25" displays.
Med-H
d. Press "
70%
e. Press " Time Entry", "STAGE-2" displays.
f. Press "5", "4","0" button, "5:40" displays.
Medium
g. Press "
50%
h. Press "START" button to save the program.
Double Quantity cooking
10.
1) If the "X2" button is pressed in Ready Mode, followed by the starting of a Preset
Program, or if the "X2" button is pressed in 5 second of starting a Preset
Program, the oven will start cooking with the quantity preset cooking time.
2) Press "X2", "DOUBLE" displays. When
the preset time
For example, number button "5" and its preset time is 1 minute. Then press "X2", then
time will change to 1:00*2=2 (2 minutes)
11.
Factory-default setting
In Ready Mode, pressing "START" and"0" simultaneously will put the oven into
Factory-default Setting Mode.
1) Press "START" and " 0 ", the b
"CHECK" If it is in the Factory-default Mode, the screen will display "11" , after three
seconds, the oven turn to the Ready Mode . Or press"STOP" to cancel the display
ang back to ready back in the process of display.
If not in the Factory-default Mode, the screen will display " 00 ", press"START"to the
Factory-default Mode,thescreen will display " CLEAR ". the b
after self-testing, the screen will display"11"or "00".
2) If do not press "STA T" when the screen display " 00 ",the setting will cancel after
10 seconds.
Be careful in the operation s it will restore all configure to Factor -default
Note:
Mode.
i
" button and " 1:25 70" displays. The first stage is finished.
" button and "5:40 50 " displays. The second stage is finished.
for that multiple
eep tone
R
the pad number
.
sounds once,and the screen will display
a
18
s
is pressed , the screen will display
eep tone sounds once,
y