Countertop Installation - Midea 1234G1A Instruction Manual

Countertop Installation

Remove all packing material and accessories.
Examine the oven for any damage such
as dents or broken door. Do not install if
oven is damaged.
Installation
1. Select a level surface that provide enough open space
for the intake and/or outlet vents(Figure1).
Fig 1
12 inc
h( 30cm
4.0 inch(10cm)
OPEN
A 4.0-inch spacing should be kept between the appliance and right and
back walls,and a 12- inch
applicance's feet ,nor block the air intake and exhaust opening. The
left side mu t be open.
s
1) Blocking the intake and/or outlet openings can damage the oven.
2）Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio
or TV reception.
3) Plug your oven into a
and the frequency is the same as the voltage and the frequency on
the rating label.
4）Warning: The plug socket,electric appliances or the appliance
which are liable to be
away from any vents on the oven.
2. Stacking and installation of the microwave
oven. The maximum height of stacking shall be
two layers. Specific stacking installation is as
follows
(A)loosening screw,Taking off installation board,then replacing screw in
its place tightly.
(B)taking off four screws as shown in the picture.
(C)putting installation board to the following location
then fixing screw just taking off tightly
)
4.0 inch(10cm)
spacing kept on the top.Never dismantle the
proper outlet (Page 5)
effected by heat and moisture should be kept
.
Cabinet: Remove any protective
film foundon the microwave
oven cabinet surface.
. Be sure the voltage
10
Fig 2
A
C
B