Midea 1234G1A Instruction Manual page 16

OPERATION INSTRUCTION
4. Pause Mode
1) While cooking , if the door is opened and then closed, or if the "
is pressed, the oven will enter Pause Mode.
2) While paused, the screen will display the remaining cook time.
3) In Pause Mode, if the "STOP" button is pressed, the oven shall immediately enter
Ready Mode; If
End of Cook Cycle Mode
5.
1) When the cooking time has expired, the oven shall go into the End of Cook Cycle
Mode. he screen will display " DONE ". T
2) If either User Option OP:11 or OP:12 is selected, the oven shall continue
opening the door or pressing the "STOP"pad; If User Option OP:10 is selected, after
the 3 second beep, the oven shall display "DONE". After the beep, "READY" will display
and the oven will enter Idle Mode without any operation for a period of time.
6. User Option Mode
This allows the user to change the configurations of the oven.
1) Open the oven door and press "2" pad for 5 seconds. The
and the oven will enter the User Option Mode.
2) The screen displays "OP: - -".
3) Press corresponding number button to enter related mode setting.
(refer to Appendix A)(Page 12)
For example: to set the
If you want to change it, keep pressing "2", the screen displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " START" to save the current setting. After saved, "OP: - -"
Note:
a. During setting process, press " STOP" to enter Door Open Mode. Clos
enter Ready Mode.
b. If "START" button not pressed at the last step, the program cannot be saved, but returns
to the previous
the "START"button
volume of the
setting .
is pressed ，the oven will go into working mode.
beep tone to medium. Press " 2 ", "OP:22" displays.
15
STOP
" pad
the beep tone
beep tone sounds once
will display again.
ing the door will
until