Functional Description; Assembly Procedure - General International DP2002 Setup & Operation Manual

FUNCTIONAL
DESCRIPTION
GETTING TO KNOW YOUR DRILL PRESS
WARNING! To avoid injury from accidental start, turn the switch off
and remove the plug from the power source outlet before making any
adjustments.

ASSEMBLY PROCEDURE

WARNING! For your own safety, never connect the plug to the power
source outlet or insert the switch insert key until all the assembly steps
are complete and you have read and understood the entire owner's
manual.
TOOLS NEEDED
● Adjustable wrench
● Phillips screwdriver
● Hammer and block of wood
BASE AND COLUMN
1. Place the base (D, fig 2 & 3) on the floor.
2. Place the column tube (C, fig 2 & 3) on the base with the support collar
at the bottom, the column ring (bb, fig 3) at the top and the rack (cc, fig
3) running between them. Align the column support holes with the base
holes.
3. Install the bolts through each column support hole and tighten into the
12
Item Description
A Head assembly
B Table support lock handle
C Column
D Base
E Table bevel lock bolt
G Crank handle
H Table / support assembly
J Chuck safety guard
K Chuck
M Feed handles
N On / Off switch
O Switch interlock key
P Table support bracket
Q Worklight switch
R Quill return spring
S Work light
T Laser switch
U Belt tension lock
V Power cord
W Motor
X Belt / pulley cover
Y Depth gauge indicator
Z Depth stop
aa Belt / pulley cover knob
bb Column ring
cc Table height adjustment rack
dd Head lock set screws