Specifications - Shindaiwa B410S Operator's Manual

External dimensions: Length × Width × Height (without cutting at-
tachment)
Mass:
Unit without fuel, cutting attachment and harness (ISO11806-1: 2011)
Unit with fuel, specified cutting attachment, guard and harness
Unit without fuel, cutting attachment, guard and harness
Volume: Fuel tank (full)
Fuel: Gasoline
Oil
Mixture ratio
Cutting attachment:
Type (Number of cutting teeth)
Specified blade diameter
Specified blade thickness
Blade centre hole diameter
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
Engine: Type
Carburettor
Magneto
Spark plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
2006/42/EC
Vibration (ISO 22867) a
hv,eq
Sound pressure level (ISO 22868) LpAeq
Sound power level (ISO 22868) L
These specifications are subject to change without notice.
Left handle
Right handle
Uncertainty K
Uncertainty K
WARa
Uncertainty K

Specifications

1840 × 700 × 530 mm
8.9 kg
10.5 kg
8.6 kg
690 mL
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10% of ethyl alcohol.
ISO-L-EGD Standard (ISO/CD 13738), JASO FC,FD
grade and Shindaiwa recommended oil.
50:1 part (2%)
3-cutter blade (3)
255 mm
3.0 m
25.4 mm
1.33 reduction and good quality lithium grease
Anticlockwise
8650 r/min
Air cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR8Y
Recoil starter
Automatic centrifugal clutch
3
41.5 cm
1.8 kW
1.05 L/h
11000 r/min
2800 ±100 r/min
2
3.2 m/s
2
2.9 m/s
2
0.8 m/s
96.9 dB(A)
0.8 dB(A)
pA
112.2 dB(A)
1.6 dB(A)
WA
27
Specifications
B410S