Table of Contents
Advertisement
Quick Links
Installation & Operation Manual
V1008-WIR-180-1
V1020-WIR-180-1 Multi-Sensor Camera
XX304-10-01
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or
that the operation will be entirely error free or perform precisely as described in the documentation. This system has not
been designed to be used in life-critical situations and must not be used for this purpose.
Document Number: 8009-8304-10-01 Product specifications subject to change without notice.
Issued: 8/2020 Copyright © 2020 Vicon Industries Inc. All rights reserved.
Vicon Industries Inc.
Tel: 631-952-2288) Fax: 631-951-2288
Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON
(800-348-4266) UK: 44/(0) 1489-566300
www.vicon-security.com
Advertisement
Table of Contents
Related Manuals for Vicon V1020-WIR-180-1
Summary of Contents for Vicon V1020-WIR-180-1
- Page 1 XX304-10-01 Vicon Industries Inc. Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or Tel: 631-952-2288) Fax: 631-951-2288 that the operation will be entirely error free or perform precisely as described in the documentation. This system has not Toll Free: 800-645-9116 been designed to be used in life-critical situations and must not be used for this purpose.
-
Page 2: Table Of Contents
Web Browser .................13 Network - FTP ..................33 Main Screen Overview ................14 Configurations ................33 Configuring the Camera’s Setting ............15 Network - SSL ..................34 Browsing Through the Configuration Menu ........16 Copyright © 2020 Vicon Industries Inc. All Rights Reserved. V1020-WIR-180 User Manual... - Page 3 Trigger Scheduled Settings .............63 Event - Alarm Handler ................49 Day/Time Inclusion Filter ..............63 Alarm Handler Configurations ............49 Alarm Schedule Settings ..............49 Event - Motion Detection ..............50 Motion Configurations ..............50 Copyright © 2020 Vicon Industries Inc. All Rights Reserved. V1020-WIR-180 User Manual...
-
Page 4: Preface
▪ Follow all warnings and cautions in this manual. in any form or by any means without the prior written consent from Vicon ▪ Do not place the unit on an unstable surface, cart, or stand. -
Page 5: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, Vicon has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 6: Installation Recommendations
Technical Support and Assistance Ensure you have a stable, clean working environment. Dust and dirt can get 1. For the most updated information of Vicon products, visit Vicon’s website into components and cause a malfunction. Use containers to keep small at www.vicon-security.com. -
Page 7: Conventions Used In This Manual
This will prevent injury to yourself when performing a task. Caution: CAUTION! CAUTION! CAUTION! Information to avoid damaging components or losing data. Note: Provides additional information to complete a task easily. Copyright © 2020 Vicon Industries Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 8: Package Contents
Preface Package Contents The V1020-WIR-180 package contains the following accessories: Name Quantity IP camera Quick installation guide Accessory pack viii Copyright © 2020 Vicon Industries Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 9: Chapter 1: Product Introduction
Chapter 1: Product Introduction 1: p hapter roduCt ntroduCtIon Overview Cable Power IN (DC12V 2.5A/AC24V 1.5A) RJ45 Alarm OUT Alarm IN Audio OUT Audio IN Reset to default button Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 10: Hardware Specifications
HTTP, HTTPS, LDAP (client), SSL, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, DynDNS, Zero Configure ▪ ONVIF: Profile S, Q, G ▪ Users: Live viewing/Administrator for up to 10 clients ▪ Browsers: Internet Explorer, Google Chrome, Mozilla, Firefox Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 11: Hardware Installation
Follow the instructions for the mount to install it in the selected location. with modules Bottom cover 3. Using a Phillips screwdriver, remove the 4 screws securing the mounting cap and detach it. Top cover Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 12 4.4 Use the 4 screws provided in the screw installation package and screw them into the expansion bolts to fix the bottom cover in the installation location (wall or ceiling). Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
- Page 13 Manual Easing Knurled Nut Manual Easing Gear Gear 8. Retighten the 4 captive screws on the dome to secure it in place. Right or Left Up or Down Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 14: Chapter 2: Camera Configuration
1. Download the IP-Finder installer file; the IP-FINDER tool (Discovery tool) find the device IP, as shown in the following section. can be gotten from the Vicon website, Software Downloads.. 2. Unzip the IP-FINDER file to a location on the hard drive. - Page 15 6. To check the available drives you can install the software to and their available and required disk space, click on the Disk Cost button. User accounts 8. Click on the Next button to continue. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
- Page 16 9. Click on the Next button to begin installation. 10. Once the installation process is complete, click on the Close button to finish. A shortcut will be created on the desktop. Next button Close button Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 17: Ip-Finder
2. When the program is launched, it will begin searching the network for IP cameras automatically (the search will last for up to 90 seconds). You can also manually search cameras by clicking on the Search button. Camera List Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 18: Introduction To The Ip-Finder User Interface
Device Mark IP” and “Firmware Upgrade” functions. NOTE: Different IP camera models use different firmwares, please do NOT update the firmware of different models using the same firmware. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 19: Web Browser
5. If no video is displayed on the screen, make sure you have VLC Media Player installed on the computer. If not, download and install it; then the video will display from the web browser. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 20: Main Screen Overview
“Admins” indicates administrator account and “User” indicates user account. Logs out from the current login session. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 21: Configuring The Camera's Setting
Chapter 2: Camera Configuration Configuring the Camera’s Setting 1. To configure the camera’s setting, click on the Setup button on the main screen to enter the configuration menu. Setup Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 22: Browsing Through The Configuration Menu
– Network Storage – Basic – Relay Handler – FTP – SD Record – SSL – 802.1x – SNMP – Firewall – LDAP – DDNS – RTSP – GB28181 Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 23: Video - Video Configuration
FPS will be reduced to save bandwidth. GOP Length Configures the GOP length of the stream; the range is 1~120. Users can enter the value or adjust it through the slider bar. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 24: Secondary Stream
Bit Rate Configures the bit rate; the range is 64~4000. User can enter the value or adjust it through the slider bar. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 25: Third Stream
Save button to apply the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 26: Audio Settings
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 27: Image - Exposure
Disable Global Mode (OFF) Set up the parameters for each image channel independently. Each image channel can be adjusted individually. After setting up the parameters, press Save to keep the configurations. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 28 Select User Define to enter the value of Maximum Gain (the range is 1~512) manually. Gain The range is 1~512. It can only be edited when Lock is selected as the AE Mode. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
- Page 29 RG Gain or BG Gain. The range is 0.00~10.00. Noise Reduction Enable this function to reduce noise. The available options are OFF and 1~11. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 30: Day/Night Settings
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 31: Image - Basic Settings
On the center of each image channel, a text box is available for entering a number from 1 to 9. Each step is moved by pixels depending on the value entered. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 32: Basic Settings Cont
Configures the brightness of the image; the range is 0 ~ 100, with 0 being the lowest brightness. Enter the values or adjust the bar to increase or decrease the values. The default value is 50. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 33 Discards all the settings applied to the image and resets to the default settings. Default All Image Settings Discards all the settings applied to the image and reverts to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 34: Image - Roi
5. Press the Set Area button for the setting to take effect. The ROI area will then be seen on the video stream. 6. Press the Del Area button or select OFF to delete the ROI area. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 35 Mask will be seen on the video stream. 4. Press the Del Area button or select OFF to delete the privacy zone. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 36: Image - Osd
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 37: Network - Basic
Configures the HTTP port number of the web configuration menu. HTTPS Port Configures the HTTPS port number of the web configuration menu. Hardware Address Unique MAC address for each camera device. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 38: Network - Basic
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 39: Network - Ftp
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 40: Network - Ssl
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 41: Network - 802.1X
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 42: Network - Snmp
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 43: Network - Firewall
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 44: Network - Ldap
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 45: Network - Ddns
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 46: Network - Rtsp
Default URL Path of Stream 1 to Stream 3 Stream 1: rtsp://cameraIP/stream1 Stream 2: rtsp://cameraIP/stream2 Stream 3: rtsp://cameraIP/stream3 Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 47: Multicast (Stream 1 To Stream 3)
Configures the port number of the audio stream. Meta IP Configures the multicast address for the html meta. Meta Port Configures the port number of the html meta. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 48 Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 49: Network - Gb28181
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 50: System - Date/Time
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 51: System - Maintenance
Records all the status information of the camera in list format when the camera is connecting to the PC. Downloads the log file to the computer as a text file. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 52: Backup
Update and Restore Click on the Choose a file button and locate the backup file; once the file is selected, press the Update and Restore button to restore camera settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 53: System - User Management
User Information. Press Give Up to delete the new user if you do not want to continue the setup. To delete an account, press the Del User button. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 54: User Information
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 55: Event - Alarm Handler
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 56: Event - Motion Detection
3. Repeat the above steps to create motion areas for zones 2 to 5. To delete an area, find the motion zone number you would like to remove, and press the Del Area button. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 57: Motion Schedule Settings
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 58: Event - Sabotage Detection
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 59: Event - Ftp Upload
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 60: Event - Smtp Notification
▪ Trigger Sabotage Detection Message Specifies the message content. Subject Specifies the subject of the message. Attach JPEG Snapshot Enables or disables email delivery of trigger event snapshots. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 61: Smtp Server
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 62: Event - Network Storage
Specifies the IP address of the network storage server. Share Specifies the shared folder name on the network storage server. Record Type Specifies the event trigger action. The options are Snapshot and Video. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 63: Login Certificate
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 64: Event - Relay Handler
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 65: Event - Sd Record
Displays whether an SD card is installed or not. If an SD card is detected, ok will be displayed; if an SD card is not detected (or a faulty SD card is used), not_mounted will be displayed. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 66 Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual...
-
Page 67: Alarm/Motion/Sabotage Detection Settings
Motion_yyyymmddhhmmss Sabotage_yyyymmddhhmmss Server Path Configures a folder name on the SD card. The default folder names for Alarm, Motion and Sabotage Detection are Alarm, Motion and Sabotage, respectively. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 68: Alarm/Motion/Sabotage Detection Settings
Configures the length of the post-event recording. The range is 5~100 seconds. Server Path Configures a folder name on the SD card. The default folder names for Alarm, Motion and Sabotage Detection are Alarm, Motion and Sabotage, respectively. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... -
Page 69: Trigger Scheduled Settings
Save button applies the configurations. Click on this button once to confirm all the settings for the new changes to take effect. Reset Click the Reset button to discard all the settings and revert to the previous settings. Copyright © 2020 Vicon Industires Inc. All Rights Reserved. V1020-WIR-180-1 User Manual... - Page 70 VICON INDUSTRIES INC. For office locations, visit the website: www.vicon-security.com...