Table of Contents
Advertisement
Sixth Systems Settings Screen: User Information
• The User Information screen allows the user to enter Company name,
user's name, and email to be included on the Net Chaser test reports.
• Touch Set Company and use the keypad to enter the company name
(Max 20 Characters) then touch OK.
• Touch Set Name (Max 20 Characters) and use the keypad to enter a
name then touch OK.
• Touch Set E-mail and use the keypad to enter an email address then
touch OK.
• Touch Set Phone and use the keypad to enter a phone number (20
characters maximum) then touch OK.
• To include a company logo, copy the desired image (jpg files only) from
your computer to the Logo folder on the Net Chaser SD card. The jpg
image size cannot exceed 586x163 dpi. Touch the "Enable/Disable"
button to include the company logo.
NOTE: If the SD card does not have a logo folder, right click in the SD Card
dialog box and click on a new folder. Name the new folder "logo".
• To continue, touch More Settings or press the Settings button
16
Seventh Systems Settings Screen: Firmware
You can have more than one version of firmware on the SD card – all
firmware files on the SD Card will be displayed on this screen. Use the Up
and Down
•
The factory installed firmware revision (default firmware) is displayed
above the firmware file table.
•
The current firmware revision that is being used is displayed above the
firmware file table Current x.xx.
How to update the Net Chaser Firmware
Warning! Do not update the firmware if the battery charge is less than
20%, unless the Net Chaser is plugged into A/C power.
• Go to:
http://www.platinumtools.com/support/software-downloads-updates/
• Verify with Tech Support if you need updated firmware.
.
buttons to scroll through multiple firmware files.
17
Advertisement
Table of Contents
