Fifth System Settings Screen (Timeout Settings) - Platinum Tools Net Chaser TNC950AR User Manual

Fourth Systems Settings Screen: Display Units
Set time/clock/date:
• Under Time Format, touch either 12-hour or 24-hour format.
• To the right of Hours (1–12), touch Set Hour. Enter the hour you wish
to display then touch OK.
• To cancel, press the Back button
• To the right of Minutes (0-59), touch Set Minute. Enter the minutes you
wish to display then touch OK. To cancel, press the Back button
.
• Under AM/PM, touch AM or PM on the screen.
• Under Date, set the month, day, and year: Touch Set Month. Enter the
number of the month, and then touch OK. To cancel, press the Back
button .
• Touch Set Day. Enter the number of the day, and then touch OK. To
cancel, press the Back button
• Touch Set Year. Enter the year (all four digits), then touch OK. To
cancel, press the Back button
• To continue, touch More Settings or press the Settings button
.
.
.
14
Fifth Systems Settings Screen: Timeout Settings
• To set Standby power down:
• Touch Set to the right of Stand-by (default is 10 min).
• Enter a whole number from 1-10 for the number of minutes then
touch OK. To cancel, press the Back button
• To set System Shutdown Time:
• Touch Set to the right of System Shutdown (4 hours is the default
setting).
• Touch the number between 1 and 8 for the hours before system
shutdown then touch OK. To cancel, press the Back button
• To configure .tst file backup to SD, touch Disable/Enable. This allows
the test files to be saved to the SD card in the event of critical memory
loss.
• To continue, touch More Settings or press the Settings button
.
.
15
.
.